Toiyabe
Adventurer
More fun.
Installed dust lights and dust light harness in bumper.
Left is red, right is amber.
Waiting to wire everything the right way with OTRATTW switches and a skygear fusebox. Fusebox should be here in the next few days, and braided sheath is on the way.
Seafood, yum.
At 222k miles, I figured it was time to redo the front suspension. I replaced UCAs, lower balljoints and bushings, inner and outer tierods.
Also installed a rear E-locker skid made by Sky's Offroad Design. It needed some trimming to fit, but it does not contact the gas tank at full compression.
Aligning it has been enough of a chore I'm going back to doing my own.
Installed dust lights and dust light harness in bumper.
Left is red, right is amber.
![](http://i211.photobucket.com/albums/bb195/toiyabe66/TacomaExPo/IMG_3580.jpg)
Waiting to wire everything the right way with OTRATTW switches and a skygear fusebox. Fusebox should be here in the next few days, and braided sheath is on the way.
Seafood, yum.
![](http://i211.photobucket.com/albums/bb195/toiyabe66/TacomaExPo/IMG_3598.jpg)
At 222k miles, I figured it was time to redo the front suspension. I replaced UCAs, lower balljoints and bushings, inner and outer tierods.
![](http://i211.photobucket.com/albums/bb195/toiyabe66/TacomaExPo/IMG_3599.jpg)
![](http://i211.photobucket.com/albums/bb195/toiyabe66/TacomaExPo/IMG_3600.jpg)
![](http://i211.photobucket.com/albums/bb195/toiyabe66/TacomaExPo/IMG_3601.jpg)
![](http://i211.photobucket.com/albums/bb195/toiyabe66/TacomaExPo/IMG_3602.jpg)
![](http://i211.photobucket.com/albums/bb195/toiyabe66/TacomaExPo/IMG_3603.jpg)
![](http://i211.photobucket.com/albums/bb195/toiyabe66/TacomaExPo/IMG_3604.jpg)
Also installed a rear E-locker skid made by Sky's Offroad Design. It needed some trimming to fit, but it does not contact the gas tank at full compression.
![](http://i211.photobucket.com/albums/bb195/toiyabe66/TacomaExPo/IMG_3605.jpg)
![](http://i211.photobucket.com/albums/bb195/toiyabe66/TacomaExPo/IMG_3606.jpg)
![](http://i211.photobucket.com/albums/bb195/toiyabe66/TacomaExPo/IMG_3607.jpg)
Aligning it has been enough of a chore I'm going back to doing my own.