I've been patiently waiting for the Ironman 1.5" Kit thats been sold out since November to become available again. After chatting with Ironman earlier this week and them still not having a solid ETA, and me having a number of trips coming up in late March/early April that I'd really like to have a lift for, I've decided to find another solution.
The kit Ironman is selling for the Armada is the exact same as their Patrol kit. This has been confirmed by their staff and by the looking at the specs provided on the US and Australian websites. As I've said before, this makes me think that ANY non-HMBC Y62 Patrol springs and shocks will work, but I wanted to do some digging to confirm my hunch. Below is a table of all the available springs from Old Man Emu (OME), Ironman, Dobinson, and Moog that I'm aware of that will work for the Y62 platform as well as all the gas/foam cell shocks.
Springs Bar Diameter Free Height Spring Rate Front Nissan OEM 54010-1LA4D 19mm 650lbf/in OME 2977 20mm 370mm/14.56" 730lbf/in OME 2978 20.5mm 370mm/14.56" 790lbf/in OME 2979 20.5mm 375mm/14.76" 790lbf/in Ironman NISS045B 20mm 385mm/15.16" 771lbf/in Ironman NISS045C 20mm 390mm/15.35" 771lbf/in Dobinson C45-352 20mm 355mm/13.98" 742lbf/in Dobinson C45-354 21mm 377mm/14.84" 839lbf/in Dobinson C45-356 21mm 383mm/15.08" 802lbf/in Rear Nissan OEM 55020-1LA8C 19mm 380lbf/in Moog 81085 20.6mm 422mm/16.63" 535lbf/in OME 2986 21mm 500mm/19.69" 540lbf/in OME 2987 22mm 500mm/19.69" 610lbf/in OME 2988 22.4mm 500mm/19.69" 680lbf/in Ironman NISS046B 21mm 522mm/20.55" 514lbf/in Ironman NISS046C 21.5mm 528mm/20.79" 566lbf/in Dobinson C45-353 20mm 485mm/19.09" 673lbf/in Dobinson C45-355 21mm 530mm/20.87" 699lbf/in Dobinson C45-357 21mm 545mm/21.46" 699lbf/in Dobinson C45-359 22mm 545mm/21.46" 823lbf/in Shocks Open Length Closed Length Front OME 90014 458mm/18.03" 297mm/11.69" OME 90015 458mm/18.03" 297mm/11.69" Ironman 45740FE 452mm/17.80" 302mm/11.89" Dobinson GS45-110 452mm/17.80" 299mm/11.77" Rear OME 60084 560mm/22.05" 350mm/13.78" Ironman 45742FE 564mm/22.20" 357mm/14.06" Dobinson GS45-111 563mm/22.17" 354mm/13.94"
Obviously there are some differences between the manufactures, but they are close enough for me to believe that they will all bolt right on. Here is the catch, though; since OME and Dobinson do not claim that these will work for the Armada, they will only bring these parts in as special order and you cannot return them if they for some reason don't work. But since I have read multiple accounts of people having success with the Ironman kit, and me being impatient and on a timeline, I said F it and ordered OME 2978's, 2986's, 90015's, and 60084's from Cruiser Outfitters here in Salt Lake. I went with the heavier springs on the front since I'm planning on putting a DASH Predator Bar and winch on this summer. Everything will be here mid-March, so we'll see how well they work out!
im looking to replace the rear suspension on my non hbmc 2011 qx56. which of these would give me the LEAST amount of lift? i just want to get rid of the air suspension.