Lets see some full size pictures...

[TXJFrosty]

2014 Ford F-250 Super Duty
3.5" lift
37x12.50x18 General Grabber X3's
9x18 XD Enduro wheels
Fox Shocks

 

[chet6.7]

This is not mine,I ripped it from a video.

 

[Dock Rocker]

This is a full sized truck pulling a full sized trailer and another extra full sized truck. Plus a bunch of junk

Sent from my iPhone using Tapatalk

 

[Betarocker]

This is a full sized truck pulling a full sized trailer and another extra full sized truck. Plus a bunch of junk

Sent from my iPhone using Tapatalk

Need bags or weight distribution. At least the steering is stable with the increased caster angle.

 

[norcal*PWRstroke]

Shot of the old 2001 7.3 F350 with the new custom bumper finally finished up. Sending it off for bedliner coating Monday morning. I have some rigid dually midnight edition lights on the way and a 17.5k lb Smittybilt X20 waterproof winch for the winch cradle

[/url]

 

[Dock Rocker]

Need bags or weight distribution. At least the steering is stable with the increased caster angle.

Yea. My plan was to bring back just the hmmwv but when everyone found out I was bringing a trailer I turned into a freight company bringing everyone’s junk back to MS. It rides great with just the hmmwv but the trailer and all the extra junk really hurt.

It was 9 hours of driving part through Atlanta traffic. I was not a happy camper. I promise next time I go out I will have air bags. I already have a compressor installed on the truck.


Sent from my iPhone using Tapatalk

 

[98dango]

This is not mine,I ripped it from a video.
View attachment 479400

Is there any more on this thing

 

[chet6.7]

Is there any more on this thing

Not much,look @ the 9min mark.

 

[BLOOSE]

The Bloose just got back from a weekend parking lot trip at COTA/F1 race

Sent from my iPhone using Tapatalk

 

[chet6.7]

Is there any more on this thing

I found a few more in another video,I like this truck.

 

[the1casey]

Hey all, I'm new here.

 

[chet6.7]

I got the winch mounted to the bumper today so I don't have to fight getting the tire on the carrier.

 

[Explorerinil]

I got the winch mounted to the bumper today so I don't have to fight getting the tire on the carrier.
View attachment 480346
View attachment 480349

Details on the winch set up please

 

[Tomin]

Here is mine. Accidentally posted this on midsize section first time. So I will put here now In the right spot.

86 K5 Blazer and camp trailer.

 

[chet6.7]

Details on the winch set up please

What did you do about license plate lights?Thanks.

On the top of the EXPUD bumper wings are some bolt holes that work for mounting the square tubing.Think of the bottom of tubing as kind of an upside down T,and the top as an upside down L.
The winch is a Warn 9200 ATV
https://www.amazon.com/WARN-92000-2...00+atv+winch&qid=1540605860&sr=8-4&ref=sr_1_4

I have not decided on the fasteners I am going to use for the wiring and the duct tape keeps the T handle of my shell from catching on the wiring. I have not had a chance to test it yet,I plan on testing SAT.
I believe the winch uses around 7A with no load and 80A with a load,I don't think the tire will put much of a load on the winch,I may be able to power it from the trailer plug. If it takes more juice I will power it from the two batteries that are going into the space where the stock spare tire was.