stioc
Expedition Leader
Couldn't agree more, it looks awesome! especially when you see the 265 comparison. Great job!
I measured my ground-clearance at the B-pillar it's 16.75" under the slider. But the measurements vary from 16" to 17" depending on if it's near the A pillar (16), or C pillar (17"). Under the front subframe it's at 13" - just for some reference.
I have ScanGuage II but I haven't been able to figure out a way to adjust anything or even see the A/T temp. Care to share what OBDII reader you got, I may have to look into it. Even though I have an iPhone I also just switched from an iPad running MotionX to Galaxy Tab 4 running BCN so going with the reader you mentioned is very doable.
I measured my ground-clearance at the B-pillar it's 16.75" under the slider. But the measurements vary from 16" to 17" depending on if it's near the A pillar (16), or C pillar (17"). Under the front subframe it's at 13" - just for some reference.
I have ScanGuage II but I haven't been able to figure out a way to adjust anything or even see the A/T temp. Care to share what OBDII reader you got, I may have to look into it. Even though I have an iPhone I also just switched from an iPad running MotionX to Galaxy Tab 4 running BCN so going with the reader you mentioned is very doable.