Photobug
Well-known member
I think my 4.5" lift and more aggressive tires and heavy duty bumper with winch cost me 15%.
So no gear ratio change?
It is safe to assume with all the works it is safe to assume at least 20% or greater fuel economy loss?
I think my 4.5" lift and more aggressive tires and heavy duty bumper with winch cost me 15%.
It is safe to assume with all the works it is safe to assume at least 20% or greater fuel economy loss?
A gear ratio change should help your mpg, not hurt it.
Tires can definitely make a difference, but fat 35" E-rated ATMs on my truck actually have less rolling resistance than the 32" street tires that came on it. That isn't normal; but there is a big variation in rolling resistance among tires that look about the same. The new tires are Hankooks, BTW.
Hankook dynapro atm!!!!
Did you get broadsided?
So no gear ratio change?
It is safe to assume with all the works it is safe to assume at least 20% or greater fuel economy loss?
Bigger tires +1 size up and 1 size wider (I assume the tire will be slightly heavier): -1 mpg (go mondo here, and expect more loss)
Raise 2-4 inches? -1mpg (go mondo here, and expect more loss)
Remove airdam, cut bumpers/add aggressive bumper for better approach or big, unconcealed winch brush guard? -1 mpg
This is exponential, so the faster you go, the worse the sum of the above will be. With big trucks/rigs, if you never go above 40-50 mph, you might see only -1 mpg at steady state.
This is exponential, so the faster you go, the worse the sum of the above will be. With big trucks/rigs, if you never go above 40-50 mph, you might see only -1 mpg at steady state.
It's gonna cost what it costs when rolling down the road, Just get on the road. BTW, (secret).....we've got maybe 50k and weeks at a time with two people and two cats in a Tiger, it can be done. Safe travels!