Well after almost two years I finally got my truck. I'm not sure what to think. I'll pretty much need a donor vehicle to complete this project. I don't have the title yet and I'm hopeful but not too hopeful on that. No keys so short of having one made somehow without the title, or disassembly of the steering lock, for now I cant turn the wheels. (Open to suggestions on the key situation). At one point the truck had some really nice re-covered seats front back and jump seats. Those are missing. No seat boxes or hardware. Shift linkage and door handles and trim are all missing. Clearly once things took a turn, the truck was scavenged for all it's useful parts, and then some. The shell is good, the carpet and most of the interior paneling is good. It has a rebuilt OM603 that's just sitting on wood blocks and the sway bar, held down by a ratchet strap. No motor mounts. Many engine accessories missing. All the A/C equipment aside from the lines are missing. Intermediate shaft from the trans to the T-case is missing. Which I hope is the correct unit. I haven't looked too close.
It's one of those deals where I don't know if I want to get another truck and swap the good from this one or cannibalize a donor for the multitude of missing bits and pieces. Sorry some of these pics are upside down or sideways. BTW the wheels were mine to begin with. I didn't expect to actually get the truck so I'm thankful (I think) to have something, but a project like this that's missing so many pieces borderlines on a burden. Sheesh.. where to begin.. I'll jerk the motor out first and I guess start looking for a donor.