Mickey Thompson Baja STZ for an LR3

[jerdog53]

Eniam17 what size did you put on? The AT2s are on my short list.


KD0ZDX

 

[Eniam17]

265/65/18 i like the size a lot. I am running 1.25" higher than stock via the IID tool and had it aligned to that spec and they fill the wheel wells up great IMO.

 

[tommyd]

265/65/18 i like the size a lot. I am running 1.25" higher than stock via the IID tool and had it aligned to that spec and they fill the wheel wells up great IMO.

pics?

 

[jerdog53]

Okay that is the size that I have been leaning towards.

 

[Mack73]

Personally I think 31.5 (265/65/18) is the perfect size for the LR3. Very slight rubbing and you can still roll on bump stops.

Only down side is no MT choices in that size, unless you go down to 17" wheels (using the new luckly8 steel or OEM Land Rover with v6 brakes).

 

[jerdog53]

It sure would be nice if the major tire manufacturers would step up, they make small diameter MT for smaller diameter wheels but nothing with larger wheels. I have emailed both Goodrich and Goodyear ash asked them to start making Mts in these smaller sizes for the LR3s and the response was predictable, were sorry we don't make that tire in that size but we have these others….. :mixed-smiley-030:

I would encourage all you all to email them even if your not in the market.

I will either do the 265/65-18 or the 255/70-18

 

[Eniam17]

A few pics. As usual the tires look better and more aggressive in person. Pics aren't great but I'm trying to show the person who requested them what the tires look like.

 

[jerdog53]

We can see them! :thumb


KD0ZDX

 

[Eniam17]

Sorry about that sizing everyone, still learning to upload pics from the iphone obviously.