My 2019 Ford F-150’s journey.

802

Member
Flashback to pre-covid December 2019, I picked up this 2019 Ford F-150 XLT, 5.0 4x4 brand new. I had an identical truck, but a 2015 and loved it.



I quickly ditched the stock wheel and tire set up. I went with some 295/70/18 Nitto Ridge Grapplers wrapping a set of 18x9 0 offset ProComp Series 41.


Did it ever rub, I installed a 2 inch puck style spacer as soon as I got home. While the puck did it’s intended purpose by increasing front ride height, it rode terribly. I complained to myself every time I drove the truck.



I added a few minor things to “buy some time” before I could actually nail down some things that are later added. I added a basic tri-fold tonneau cover. It did it’s job, kept gear somewhat “safe.”


The Cap.

I found one, just a state away. The world was just awakening from COVID’s lockdown. There was no new caps anywhere to be found, except this one. J7 Magnetic gray, frameless rear window and yes I desired the solid side windows. I was pumped and hopped in the truck.






A short time later, after countless hours of debate and researching I settled on a set of Bilstein 6112 coilovers in the front with the 5160 shocks in the rear. Boy, I was “shocked.” They ride amazing and soak up incredibly. I sourced them from a few sales and promos, I think I’m right about $700 into them.










The truck was set up “well enough” for my current state. Held all the ski and bike gear I own. Took us on many trips and had some great lot camping nights. I added a few minor things along the way, mostly Diode Dynamic lighting.















When I hit the 30k mile mark I refreshed the rubber and wheels to a set of 295/70r18 Mickey Thompson Baja Boss A/T tires on Method NV 305 18x9 0 offset wheels. The same specs as my original set up. I’m blown away at the epic performance of these tires!







One night, my girlfriend walked through the door. Straight faced and stern stated “I want to head out west.”

Those were probably the best six words one could hear living on the East Coast.

We’re headed out the last week of January and heading back “sometime in March.”

I had approximately two months to plan. I’m down to one, my living room looks like an off-road store. I’ve got an itinerary, maps full of hi-lighter and a lot to install.

Conveniently, the truck breaks down and has been at the dealer for over a week with at least another left. Roof rack to install, tent to erect, skid plates to mount, spare to swap, lighting to wire up with a shakedown the weekend of the 15th.

It may not be the best time in terms of trail accessibility but the western United States is massive and there’s still plenty to explore. A good part of the trip is visiting some friends, not to mention we’re skiers so a number of nights will be at Ikon resorts.​


I hope to use this as a journal of the truck’s adventures and build.
 
Last edited:

802

Member
Very nice! What has the truck in the shop?


Sent from my iPhone using Tapatalk

It received one new CV (left) and both hubs. I popped a hole in a CV boot which caused it to fail, the hub was slightly out of spec perhaps due to this and the other side was replaced out of caution while it had no issue. All was covered under warranty (somehow lol)
 

802

Member
Nice build. Love seeing more and more F150s. They really are the best platforms.

What skids did you go with? I assume RCI since that is about the only option...

I did go with RCI, but in my search I’m pleasantly surprised there’s a lot of options out there. I’m finding more and more people (generally machinists with side-gigs) that own F-150 and make skids and other things for them.
 

SDDiver5

Expedition Leader
I did go with RCI, but in my search I’m pleasantly surprised there’s a lot of options out there. I’m finding more and more people (generally machinists with side-gigs) that own F-150 and make skids and other things for them.
Why did you choose RCI over the others? Care to share the companies or IG? I know of a few guys but haven't found too many.

What gearing do you have? I need to regear next and then I am going to get skids and sliders...."then I'll be done" lol
 

802

Member
Why did you choose RCI over the others? Care to share the companies or IG? I know of a few guys but haven't found too many.

What gearing do you have? I need to regear next and then I am going to get skids and sliders...."then I'll be done" lol

There is a few people who have posted on the F-150 groups in Facebook. Falconsgarage is one that I almost purchased from. I went with RCI simply for the reviews. Not knocking the smaller guys, just more reviews from RCI as they’re more known.

I have 3.73, I don’t feel the need to regear. The 10 speed is easier to mask the needs of regearing. Not to mention I only went like an inch taller in tire.
 

SDDiver5

Expedition Leader
There is a few people who have posted on the F-150 groups in Facebook. Falconsgarage is one that I almost purchased from. I went with RCI simply for the reviews. Not knocking the smaller guys, just more reviews from RCI as they’re more known.

I have 3.73, I don’t feel the need to regear. The 10 speed is easier to mask the needs of regearing. Not to mention I only went like an inch taller in tire.
Appreciate the feeback.

The 10 speed is a game changer. I leased a 2018 with the 2.7 and 10 speed. Great combo. I now have the 5.0 but with the 6 spd and it needs help to say the least.
 

802

Member
I got the Forscan software and the OBD link tool and did a bunch of “upgrades”
Most importantly Bambi mode, which is running fog lights while having hi beams on is great pared with the SS3 fogs. If anyone is on the fence I can walk you through it, it’s super simple once you get into the program.
I’m running halogen high beam bulbs as they produce more heat to help keep the lenses clear of ice and condensation. I am running an LED low beam bulb and really like the set up.

Added another set of ditch lights, SS1 series for more true ditch illumination.

I put in 4 ratcheting cargo load bars in an upright fashion to give more stability and support in the cap. While it’s rated for the load, taking any extra weight should help due to off-road abuse. Not to mention the ability to make a “clothes” line to hang packs and dry out clothes from bar to bar.
 

ITTOG

Well-known member
Do the ditch lights point forward or to the side? Looking online it appears the bracket sold with the SS3's point directly forward so how does that help with the ditch?
 

802

Member
Do the ditch lights point forward or to the side? Looking online it appears the bracket sold with the SS3's point directly forward so how does that help with the ditch?

You can rotate the light itself in any orientation. I added an additional plate so I can mount an additional light and mounted the SS1 beside the forward facing SS3 to illuminate both forwards and ditch side.
 

Forum statistics

Threads
188,178
Messages
2,903,430
Members
229,665
Latest member
SANelson
Top