My FZJ80 Overland Build

[LexusAllTerrain]

No show, like you I have been away from overlanding for a while, but next year is going to change, and I will start with a trip to Baja to pet the whales at Scammon's lagoon in Feb or march. only 164k miles, new leather seats coming soon. Best of luck on 2019.

 

[toastyjosh]

Try this product for your oil, have heard great things about it. I love liuqi moly stuff anyways. I plan on running this in my cruiser after the valve cover gasket change.
https://products.liqui-moly.com/additives/cera-tec.html

 

[Summit Cruisers Jr]

Same here. This is what I’m seeing

 

[NM-Frontier]

Ok, so its a bit but I finally think I fixed the pics, better late then never...

 

[NM-Frontier]

I also got around to installing my DELTA VS
PANHARD LIFT BRACKET

I went with the 3" lift option and it got the bar almost perfect level the way it is suppose to be. Install was easy and straight forward, I soaked all the bolts with PB Blaster a few days prior to install witch made life easy.
I am beyond stoked on the restored handling, I knew I had some sway and some walking out of the rear going on but after installing the bracket it was crazy how much it helped. I think any one with an 80 could defiantly benefit from this!




Nice and flat now! (Sorry I know I should have taken a before shot)

 

[LandCruiserPhil]

I also got around to installing my DELTA VS
PANHARD LIFT BRACKET

I went with the 3" lift option and it got the bar almost perfect level the way it is suppose to be. Install was easy and straight forward, I soaked all the bolts with PB Blaster a few days prior to install witch made life easy.
I am beyond stoked on the restored handling, I knew I had some sway and some walking out of the rear going on but after installing the bracket it was crazy how much it helped. I think any one with an 80 could defiantly benefit from this!

View attachment 501316

View attachment 501317
Nice and flat now! (Sorry I know I should have taken a before shot)

Looks to be a perfect fit.

 

[NM-Frontier]

A few Sedona pics from last month

 

[NM-Frontier]

Finally pulled the trigger on a Speski Barrier, it's one of those things that has always been on the list but after a few times this last summer loaded to the gills I figured it was only a mater of time before junk from the back goes flying up to the front! Fit and finish was nice and strait forward.

 

[NM-Frontier]

I've got some updates to the build that I am working on but for now, here are a few shots from some exploring around Idaho this fall.

 

[Stoffregen Motorsports]

Trucks always look better with mud on them. Nice pics.