Need shocks, should I just get a lift kit?

[jeep-N-montero]

My OEM shocks seem to handle large bumps well and are in good condition but small bumps/pot holes and corrugated roads are pretty bad up front. I'm looking for a less harsh ride, can I install the Bilsteins with stock springs retaining correct length/travel?
Recommendations for dirt roads/small bump compliance?

Yes, http://shop.adventuredrivendesign.com/index.php?route=product/product&path=71_73&product_id=78

 

[mbialick]

Do the Bilstein's front struts have adjustable ride height?

 

[mbialick]

Great thank you, and possibly last question, if I were to add lift springs in the future, would I need to replace the front struts to a different length?

Thank you all for the help!

 

[jeep-N-montero]

They are not height adjustable but can be used with a mild lift in the future.

 

[plh]

Great thank you, and possibly last question, if I were to add lift springs in the future, would I need to replace the front struts to a different length?

Thank you all for the help!

The Bilstein numbers above handle the OME medium springs just fine. I run them on my '05. About 1.5" lift from stock. Do the springs at the same time, cost is ~$170 a pair for springs. It is a lot of work to remove and replace the front shocks. Labor on a very good day is 3 hours for the front pair.

Highly recommended to replace these parts as well in association with the front shocks:
MR448170 Shock Mount - 2
MR455493 Upper Seat - 2
MR353211 Upper Seat Spacer -2
MR448173 Spring Seat - 2
MR374547 Lower Bushing - 2
MR374556 Cup - 2
MR448174 Lower Seat - 2
MF106152 Shock Bolt - 2
MS451115 Washer - 2
MF430124 Nut - 2
MR374546 Upper Bushing -2
MF434105 Strut Mount Nut - 6

 

[mbialick]

The Bilstein numbers above handle the OME medium springs just fine. I run them on my '05. About 1.5" lift from stock. Do the springs at the same time, cost is ~$170 a pair for springs. It is a lot of work to remove and replace the front shocks. Labor on a very good day is 3 hours for the front pair.

Highly recommended to replace these parts as well in association with the front shocks:
MR448170 Shock Mount - 2
MR455493 Upper Seat - 2
MR353211 Upper Seat Spacer -2
MR448173 Spring Seat - 2
MR374547 Lower Bushing - 2
MR374556 Cup - 2
MR448174 Lower Seat - 2
MF106152 Shock Bolt - 2
MS451115 Washer - 2
MF430124 Nut - 2
MR374546 Upper Bushing -2
MF434105 Strut Mount Nut - 6

Do you have a recommended place to order these small parts from?

 

[ChrisCosta416]

I have a gen3 suspension sheet on here that has all the different lifts available.