New Expedition Camper - Overland Explorer

[ersatzknarf]

I suspect the only thing(s) Bullfinch is the fitting and possibly the shower head. I suspect the hose is generic and can be made any length. I am scheduled to pick up the camper Thursday next week. I can tell you for sure after that. Or perhaps Mark from Overland Camper will chime in here.

Howard

Thank you !

If it is a generic hose and the fittings are possible to be disassembled, then it should be no problem...

Did some later looking on a few UK websites and there is a 2m replacement hose available, so one hopes the fittings are not a problem and available on this side of the pond

 

[java]

Thank you !

If it is a generic hose and the fittings are possible to be disassembled, then it should be no problem...

Did some later looking on a few UK websites and there is a 2m replacement hose available, so one hopes the fittings are not a problem and available on this side of the pond

My local marine store had the metric fittings needed for the backside connections, if there is something weird that might be a good place to look.

 

[HowardH]

Wow just got the email. My camper is done. Wish I was leaving right now as opposed to waiting until Wednesday next week. Here are some pics I was emailed today.

The bunk bed/dinette.


Some detail of the roof and a/c


Side view

 

[HowardH]

Counter showing diesel stove and the sink.


Interior right side showing pantry and fridge.


View of dinette left side with small return sized for an ARB style chest fridge/freezer or other storage.

 

[HowardH]

Detail of the raising back on the dinette. It does double duty as a back rest and lifts up to form a roomy bunk.

 

[HowardH]

Here is the dinette with the back rest in the down position. Dinner anyone?

 

[locrwln]

Very nice.
.
Jack

 

[java]

Awesome! I'm sure it's going to be even better when you pick it up!

The design looks great.

Sent from my SM-G950U using Tapatalk

 

[IdaSHO]

Looks great Howard!

I look forward to photos of it loaded up :ylsmoke:

 

[ersatzknarf]

My local marine store had the metric fittings needed for the backside connections, if there is something weird that might be a good place to look.

Many thanks for that good information !

 

[ersatzknarf]

Wow just got the email. My camper is done. Wish I was leaving right now as opposed to waiting until Wednesday next week. Here are some pics I was emailed today.

The bunk bed/dinette.


Some detail of the roof and a/c


Side view

WOW ! Looks wonderful ! ! !

 

[HowardH]

At Lite Industries picking up my camper. Performing the final finishing touches. Fantastic attention to detail. Very impressed with my camper.

They have a TEK 4 machine in the shop. Was interesting to see that this 100,000 lb machine has the same mounting system as my little flatbed. 🙂

 

[HowardH]

 

[HowardH]

Official camper weight is 3550 lbs. Not sure how that might compare to others, but too me it's a very light weight for a 12' long full width camper.

 

[java]

That looks amazing Howard! How does it drive?

3550lbs is very light IMO as well. Is that wet?