2000 LANDCRUISER
New member
Hello I have just just joined Expo, although have been a guest on several occasions. I spend my time between New Zealand and Australia. I have recently bought a HZJ79 Landcruiser set up for outback travel with a camper cabin on the rear. I have just completed a 1100 km trip on sealed highway ? very rough in places. I am concerned about the way the camper is mounted to the chassis, when driving on rough roads , if you look out the rear window the camper box is moving back and forth ,near the top , this tends to make the whole vehicle rough riding, kind of bucking and jumping. The camper is only mounted in 3 places, 2 at the front 1 at the rear.The mounts are like spring shackle bushes ( rubber bushes with bolt through the center). My thoughts are that this is allowing the camper to move way to much . I notice many large campers have 3 point mounts to allow for chassis flex , is this needed for smaller vehicles like the Landcruiser ? I am considering more mounts , maybe 2 at the rear and 1 each side 1/2 way between front and rear, any thoughts or suggestions would be appreciated, thanks