Hi TJ, not sure if it will work on your passenger-side problem, but I had a leak on drivers-side when the elbow for the through the metal juncture disintegrated. Rather then buy the entire system of tubes and such, I went to local h/w store and bought some flexible tubing slightly larger than the drain tube, and then attached that snugly over the existing tube. Then I simply routed it out the path for the drain tube. Apply a little caulk, and 3 yrs later, it's still dry. In retrospect, I think I intended this as a temporary fix, but after going through a few monsoons with proper draining, I got to thinking the workaround fix is probably just as good as the failed-model original equipment.