Post Pic's of your Jeep

[JIMBO]

:bike_rider: I'm never in a hurry

How do you remove the extinguisher in a hurry?

Na, just pull down the three tabs and it pops right out

:safari-rig: :campfire: :safari-rig: JIMBO

 

[JIMBO]

:bike_rider: Just added some "light duty" top hold downs, for my inflateable in the "HILLS"

and an overhead "RAINGLER," for coats and blankets, light stuff

It was raining outside, in the wilderness

:safari-rig: :safari-rig: JIMBO

 

[njjeepthing]

:sombrero: I'm afraid this mod is illegal and I can't (Detail) how to do it, but




buy a universal hand throttle assy from KRAGENS/PEPBOYS etc, about $10 bucks

you can attach the PULL wire assy (shortened) to the outside handle FULCRUM

If you remove that side (black) vent and operate the tailgate button, you can see what you have to attach the wire to

With that kit there is a little brass wire guide with a lock screw and I used that

Now thats a general idea, it's pretty simple push/pull latch operation

:safari-rig: :safari-rig: JIMBO

Awesome thanks.

 

[CA-RJ]

Here's one more from yesterday. I was about 15-20 miles north of highway 62 making my way to Cadiz, CA.

 

[JIMBO]

:archaeolo Just installed a set of sliders and the rear diff SKID plate

Here's the diff/plate and one of my dual exhaust pipes from the FLOWMASTER 40 dual cat-back

Here's a better shot of that Raingler net, on the back rollcage cross

An elbow pad (Rugged Ridge), I just put in for my ELBOW

CB and ProComps next

:safari-rig: :safari-rig: JIMBO

 

[98dango]

well here is the jeep had it about 5 days

lots of plans as this is my 5th yj and 10 or so jeep
my druango and toyota desided to die on the same day so heres the replacement

 

[BC Explorer]

Is that A/C I see under your dash

[/QUOTE]

 

[Nightkrawler]

Two of my favorite pics.:mixed-smiley-030:

 

[JIMBO]

:archaeolo CB's in and I saved the dash

:archaeolo Just installed a set of sliders and the rear diff SKID plate



Here's the diff/plate and one of my dual exhaust pipes from the FLOWMASTER 40 dual cat-back


Here's a better shot of that Raingler net, on the back rollcage cross



An elbow pad (Rugged Ridge), I just put in for my ELBOW



CB and ProComps next

:safari-rig: :safari-rig: JIMBO

Next, antenna and ProComps

:safari-rig: :safari-rig: JIMBO

 

[proper4wd]

Winter camping trip 2008, Bennington VT in February

 

[njjeepthing]

Winter camping trip 2008, Bennington VT in February

Nice pics, looks cold! :REOutCampFire03:

 

[proper4wd]

Not too bad, it was in the high teens that night. It had snowed about 3" while we were wheeling all night getting to our camp spot at the lake. What you see is only after the tent was set up and the trucks were parked!

Can't wait to do it again this year. I'll be sure to post up on here. Look for something January/February!

 

[BC Explorer]

What cables/chains are those that you are running and how are they working out ?

 

[proper4wd]

They are just NAPA bought v-bar ladder chains. They're great in deep snow, but they're not for the road at all. Not as fancy as the RUD ones, but they work at least as well and are a lot cheaper. You just have to practice putting them on!

 

[DarinM]

Jeep

Enjoyed looking through this thread again at so many cool Jeeps.
I still haven't been able to afford to get mine lifted, but I did get the winch and lights installed. I don't have any pictures now, but I used a set of Maglight mounts (the plastic ones) to put my front license plate on the roller fairlead. I saw it done that way on another website quite some time ago. Texas requires front and rear tags and this seemed to be the easiest way to do it. It just snaps on and off!

Here's a shot of it from last month in Colorado.

And another sitting up pretty high...