Post Pic's of your Jeep

[Kiriesh]

Here's mine:





Some quick specs:

• Hankook RT03 37/12.5R17 on level 8 trackers
• Prorock 44 front axle with 4.88 gearing, chromoly RCV shafts, and ARB
• 1310 Yoke front driveshaft
• 3.5in OME coils, bilstein 5100 shocks, and metalcloak LCAs/Trackbars
• ARB front bumper with KC fogs and VR10000 winch
• Orfab rear tire carrier with warrior products rear bumper
• Nemesis Industries flat fenders with skeletos upgrades
• 4.88 gearing and ARB in the rear axle
• ARB dual compressor under the hood

Its primarily my wheeler/DD right now but I'm hoping to start overlanding in it soon and possibly diving into a more overlanding based build!

 

[thetanningman]

Recent changes to my JKU

Trucklite LED headlights, Aussie/Euro fender marker lenses, and 315/75/16 Cooper ST Maxx's

 

[Ausjeeper]

2014 Rubicon Unlimited:

AEV Front and Rear Bumpers
AEV Snorkel
AEV 2.5" Dualsport Lift
Warn 9.5CTI Winch

Love the colour of your Jeep.

 

[AeroSynch]

I guess you can say I use it for its purpose and then some.

 

[V00D0013]

Work in progress

37 inch tires BDS 6.5 Long arm lift, snorkel,5.13 regear, some other stuff. Mainly working on the trailer now.

 

[Beamer pilot]

37 inch tires BDS 6.5 Long arm lift, snorkel,5.13 regear, some other stuff. Mainly working on the trailer now.

Nice set up, contrasting expedition rack on the Jeep looks good.

Kicking my butt for not getting the annex with my ARB RTT, apparently they don't make them any more according to 4WD.

 

[iMTB]

Road washed out?

Bring a Jeep!

 

[sneakytj]

Off to Camp....

 

[V00D0013]

well pm me beamer. I may be selling the tent and annex to get the Mt. McKinley for the family. I got an offer on the tent and would gladly consider parting the annex! Thanks for the compliments. its been a long time in the making.

 

[Beamer pilot]

well pm me beamer. I may be selling the tent and annex to get the Mt. McKinley for the family. I got an offer on the tent and would gladly consider parting the annex! Thanks for the compliments. its been a long time in the making.

Unfortunately the shipping costs and border taxes (even on used) would make it unaffordable.

 

[alexfm]

Pretty recent picture of my rig:

 

[Dr. Marneaus]

Just doin' my thing....



Then time for a cold beer at the oldest bar in clark county.

 

[WrenchMonkey]

So, so cool...

 

[LPIII]

Finally finished, I am current on this thread now four hundred pages plus of really cool rigs! I am inspired by so many rigs on here, the passion for the Jeep heritage is alive and well. I am building an XJ that has been going on for over a year, it began as a simple " let's clean her up give her a lift and new wheels and tires." My project morphed into a full body bare metal repaint, trussed axles, ARB lockers front and rear, ARB twin compressor, 4:56 gears, recaro four place seating, AEV Pintler beadlocks, Warn rear bumper and tire carrier, IPF back up/work light deaver springs, rock Krawler long arm, rock Krawler remote reservoir shocks ARB front bumper, warn 9000xd with ASR synthetic line, full length ARB roof rack with ARB mounts, Cascadia roof top tent, IPF lights, fyrlyts coming, ARB front and rear diff covers on built Dana 30 and Chrysler 8.25, Genright 30 gallon tank, front Vanco 17" big brake kit, teraflex rear disc kit, ARB fridge/freezer lower quarter and interior has been linexed, safari snorkel, bushwhacker cut out flares, oh yeah Golen 4.6 stroker motor, more details to follow

 

[Scooter Scott]

That's quite the build