Thanks for the info. I never thought about what kind of finish. I am planning on line-x though for the finish. I spent a lot of time on the beach with sand so I thought the line x would hold up better to that.
Sent from my iPhone using Tapatalk
Post up your drawer/storage system
- Thread starter neliconcept
- Start date
Thanks for the info. I never thought about what kind of finish. I am planning on line-x though for the finish. I spent a lot of time on the beach with sand so I thought the line x would hold up better to that.
Sent from my iPhone using Tapatalk
Installed my trunk storage today in my Jeep Grand Cherokee WK.
Because my spare wheel doesnt fit under the car anymore, I was driving with the spare in the trunk the whole time.
On the roof is my roof tent, so I started reading this thread.
The storage can be used with rear bench or without.
I will make some changes in the finish and then I start part 2 of the project.
Part 2 will be a system to fix my Zarges Alu Boxes and the Engel Refrigerator instead of the rear bench and obove everything I will make a small sleeping plattform.
Because my spare wheel doesnt fit under the car anymore, I was driving with the spare in the trunk the whole time.
On the roof is my roof tent, so I started reading this thread.
The storage can be used with rear bench or without.
I will make some changes in the finish and then I start part 2 of the project.
Part 2 will be a system to fix my Zarges Alu Boxes and the Engel Refrigerator instead of the rear bench and obove everything I will make a small sleeping plattform.
Attachments
Last edited:
Hillbilly Heaven
Explorer
Nice tie down tracks. Like the radius instead of the square type. Do you know whose brand those are? How about a little details on the portable power pack?
Dont know who the manufacturer is, but I bought them here: https://www.lasi24-shop.de/de/zurrschienen-airlineschienen
The powerpack can be charged with 12V or 220V and can supply 12V or 220V.
Not much experience with it because its new
Hillbilly Heaven
Explorer
Thanks
I found a U.S. manufacturer of it.
http://www.macscustomtiedowns.com/product/versatie-aluminum-track-series3-96/VersaTie-Track
jrob
Observer
Accuride 32" from mcmaster carr
Not cheap but super high quality.
The small drawer uses 24" self close from home Depot.
Might check your scroll wheel fluid. Could be a little low.
Last edited:
kwill
Observer
Hillbilly Heaven
Explorer
Is that leg of the fridge slide, where your locking pin is for the lower slide sitting on the tailgate or past it holding it open? Also fantastic job on incorporating power/charging outlets with switches and of course the mandatory bottle opener.
Just rebuilt the drawer setup for my 100 series. Turned out exactly like I'd hoped, and performed great in CO last week.
How much did this all cost you? What kind of wood did you use. Looks great.
Sent from my iPhone using Tapatalk
JBThompson
Adventurer
I had today off so I started building our drawer system while my wife was at work. Nice little surprise for her when she got home. :ylsmoke:
I still have to build the drawers. The panels are cut for the sides but I ran out of MDF for the bottoms and I haven't picked up the sliders yet. One drawer will have the kitchen with a camp stove and cookware, and a sliding panel for food prep.
I was even able to keep my 12" sub, it will live under the drawers now and there is still plenty of space down there for a tool kit and small items.
I am going to build a third drawer that will go on top, and next to it will be a sliding platform for the cooler (eventually a fridge). I'm going to paint everything with a textured finish and then maybe rubberized diamond plate or something on the top where the tent and luggage will go. Still mulling over latches, too.
I still have to build the drawers. The panels are cut for the sides but I ran out of MDF for the bottoms and I haven't picked up the sliders yet. One drawer will have the kitchen with a camp stove and cookware, and a sliding panel for food prep.
I was even able to keep my 12" sub, it will live under the drawers now and there is still plenty of space down there for a tool kit and small items.
I am going to build a third drawer that will go on top, and next to it will be a sliding platform for the cooler (eventually a fridge). I'm going to paint everything with a textured finish and then maybe rubberized diamond plate or something on the top where the tent and luggage will go. Still mulling over latches, too.