Post Van Parts For Sale Here please

[tookstar154]

Still interested in getting a rear step bumper if anyone has one, or knows where to get one. Tried getting ahold of Ramsey, but no dice so far. Also looking for the plastic piece/cover that goes on the side step of the van, where the van doors open up.

 

[silvrzuki77]

I'm in Vegas if you really really want a rear step bumper. It's the gray work style. PM me.


Sent from my iPhone using Tapatalk

 

[Bbasso]

Want to buy asap.
A single matching wheel in good-excellent condition.
Please be willing to ship.
I have $80 to spend.

Here is a picture of the wheel I want.

Thank you.

I'm still looking for the wheel if anybody has it, I'll remove this add once I have purchased it.

 

[desertspeed]

I have a stock grey 3rd row bench seat with QR mounts (no seatbelts) as well as stock front seats (no bases) from a 2000 van- free if anyone wants them. Located in St George, UT but I am heading down to SoCal the week after XMas. All cloth is in good shape with no tears.

If not they are going to the landfill

 

[ohpyramids]

looking for white side doors with pop out windows!

 

[Cole]

I've got about 3 Eurovans worth of parts right now if anyone needs VW T4 parts. Located in the Castle Rock, CO area.

 

[mikracer]

I am selling my Camburg lift kit as my van will be getting a 4wd kit installed in the next couple of weeks.

This kit only has 4,000 miles and is in perfect shape. The kit hasn't seen any off road use but should be very capable for it's next owner. This is the bent I beam kit that Camburg requires you to have them install. I waited 5 weeks for them to build the kit and then it took another week for them to install it. If you're in the market for a 2wd lift kit, save time and money by buying this one!

Includes bent I beams, custom radius arms, limit straps, front coil springs, rear block kit, and hardware. The front shocks are the upgraded Fox 2.0 shocks with remote reservoirs. The rear shocks are Bilstein. When I got the kit installed, I had Camburg install new upper and lower ball joints. They installed OEM Ford ball joints but one of the uppers failed after only a couple thousand miles. I took my van back to Camburg and they swapped both of the uppers with new serviceable Moog units.

If you were to order this kit today, it would cost $3,495 + $260 shock upgrade. I also paid $600 for the ball joints/install.

Asking $3,000 obo

I'm scheduled to pick up my van in about a month and thats when this kit will be available. Anyone from San Diego to San Luis Obispo that is interested, I can meet on the way home from picking up my van.

Pics - http://www.sportsmobileforum.com/fo...mance-lift-kit-with-fox-2-0-shocks-16524.html

 

[philos]

Looking for a pair of stock 16" steel wheels for an E350 Ford van, 8x6.5
Dirt-cheap or free in SoCal, San Fernando Valley or thereabouts.
Need two to build a jig for my TTB swap, so they'll be getting welded to some 2x2 and then put in the scrap pile after I'm done.


Sent via flux capacitor

 

[Bbasso]

For sale:
Two Econoline Rear Window Safety Screens.

I have these for a while and planned to install rear doors with factory windows but I never seem to find nice doors...
I have all the hardware, a bunch of screws and washers.
They are plain gray color .

Looking for $50 + shipping.
$discount for local cash pick up.

Pictures later today.

Btw, I have access to pop out windows for Ford Econoline vans, but since I am not sure how to ship glass safely, pick up only. Rear and side doors.

 

[Abitibi]

Dana 60, Locker and more

Hey guys

Previous sale fell through so its back on the market and ready to ship.

This is pretty much all the parts needed for a UJOR conversion including a 2004 rebuilt Dana 60 (BOM: 611337-2) stripped down and painted with Por15. Comes with new seals, new bearings, newish 4.10 gears and a new Eaton electric locker. I'm including new dust shields, new calipers and new TBM rotors and pads (those are sweet and recommended by Chris at UJOR).

I'm also including the following with the axle. Those parts are as is, consider them as extras
NV271 transfer case (not rebuilt but turns freely, feels good).
Tranny adapter.
Front driveshaft.
Front swaybar.
Upper u-bolt plate.
Warn premium locking hubs (a bit rusty but free & cleanable).
The rear driveshaft in the last pictures isn't included...
And a few other bits needed for the UJOR conversion. Obviously the axle and parts could be used for any other conversions...

All the parts are in a crate and ready to ship. Previous potential buyer had arranged for shipping to California before having to back out for personal reason. The shipping cost are very reasonable (I have the contact info if needed).
$2800

 

[cjken]

If anyone needs some front dual hubs. I got em.


And or 2.5" spacers steel spacers.

 

[Jsweezy]

I have some 2014 E350 stuff for sale, set of the stock 2014 mirrors brand new take offs (100) as well as the last row seat mounts and seat belts (50).

I am also looking for a 4 person bench seat from a newer van, gray in color. Preferably fairly local so I don't have to pay shipping.

Thanks!

 

[mikracer]

Picking my van up this week and can meet anyone interested from SD to San Luis Obispo...

I am selling my Camburg lift kit as my van will be getting a 4wd kit installed in the next couple of weeks.

This kit only has 4,000 miles and is in perfect shape. The kit hasn't seen any off road use but should be very capable for it's next owner. This is the bent I beam kit that Camburg requires you to have them install. I waited 5 weeks for them to build the kit and then it took another week for them to install it. If you're in the market for a 2wd lift kit, save time and money by buying this one!

Includes bent I beams, custom radius arms, limit straps, front coil springs, rear block kit, and hardware. The front shocks are the upgraded Fox 2.0 shocks with remote reservoirs. The rear shocks are Bilstein. When I got the kit installed, I had Camburg install new upper and lower ball joints. They installed OEM Ford ball joints but one of the uppers failed after only a couple thousand miles. I took my van back to Camburg and they swapped both of the uppers with new serviceable Moog units.

If you were to order this kit today, it would cost $3,495 + $260 shock upgrade. I also paid $600 for the ball joints/install and $100 for new sway bar bushings.

Asking $2,800 obo


Pics - http://www.sportsmobileforum.com/for...cks-16524.html

 

[naterry]

It's time for fall garage cleaning!

Free OEM seats in blue/grey vinyl, front with cheapo nylon seat covers. No rips, very shiny! Front, mid bench, rear bench, and bracketry. Come and get em' :

Finally got rid of the Wheels, tires, front seats, and axle. Someone come grab these benches!

 

[RememberTheFallen]

May be in wrong place but I am trying to determine if there is any value in the bench seats that came out of my 04 passenger van?

It would be the most forward 3 person seat and the rear 4 person seat. Brackets and seat belts would be included.

Based on eBay prices they either sell like gold or for almost nothing at all.

Trying to get basic price or if anyone if interested I would gladly sell them.

Thanks,

Joe