Price Advice - 07 Nismo Frontier 4x4 expedition ready -13k?

spencertron

New member
Hello all. Looking for some help. I have a Chevy Colorado. I have been searching tirelessly for a Flippac camper for years. Finally found one, but it's attached to a frontier and the owner absolutely will not part them out. My plan is to buy the truck, remove the flippac, throw on the aluminum shell and roof top tent from my colorado and re-sell the frontier. Looking for a fair price range before I pull the trigger. Please see the pics of the truck for sale. The last photo is my camper shell/tent that will go on the truck before selling it. It's an A.R.E. DCU shell and a smittybilt XL tent.

145,000 miles
2 owners (current one for over 11 years)
very well maintained (i've seen service records)
all highway miles, not a daily driver. was used as a family road trip camping vehicle and now this guys kids are all grown up.
only scheduled maintenance that needs to be down is the timing chain, which I've read up on a bit, and eventually a new clutch.
will include everything (fridge and stove, build outs, dual battery system, solar panel, etc.)
lift
armor
winch
body looks to be very clean
located in Orange County, CA.

Does $13k seem totally high for the vehicle without the flippac and with my shell/tent?
thanks for your help!!!!
 

Attachments

  • 130479240_10158808081759393_6666524181377930580_o.jpg
    130479240_10158808081759393_6666524181377930580_o.jpg
    103.4 KB · Views: 136
  • 130202623_10158808081684393_8175771383480990373_o.jpg
    130202623_10158808081684393_8175771383480990373_o.jpg
    84.4 KB · Views: 144
  • 130255825_10158808081754393_2724676783441742394_o.jpg
    130255825_10158808081754393_2724676783441742394_o.jpg
    97.5 KB · Views: 134
  • 130283913_10158808081719393_9184182204235289957_o.jpg
    130283913_10158808081719393_9184182204235289957_o.jpg
    107.1 KB · Views: 133
  • 130449397_10158808081799393_5302462713826108986_o.jpg
    130449397_10158808081799393_5302462713826108986_o.jpg
    144.5 KB · Views: 152
  • 130481097_10158808102634393_5497588813049123433_o.jpg
    130481097_10158808102634393_5497588813049123433_o.jpg
    112.7 KB · Views: 152
  • 140446296_526100928295711_8187590075675354392_n.jpg
    140446296_526100928295711_8187590075675354392_n.jpg
    616.4 KB · Views: 155
  • 140484984_172893167500305_4428722172149749374_n.jpg
    140484984_172893167500305_4428722172149749374_n.jpg
    429.7 KB · Views: 148
  • 140507135_781130022488860_4562733007530487156_n.jpg
    140507135_781130022488860_4562733007530487156_n.jpg
    532.7 KB · Views: 142
  • 161058139_281789343361549_3161270230647240477_n.png
    161058139_281789343361549_3161270230647240477_n.png
    2.1 MB · Views: 137
Last edited:

Msand

Importer
Flip pacs sell alone for around $2,500-$4,000. Depending on if the front hinges and latches have been replaced and the amount of cracking in the gel.

Frontier would probably sell for around $8,000 as it sits. Add the other items and it's a fairly priced rig
 

spencertron

New member
Flip pacs sell alone for around $2,500-$4,000. Depending on if the front hinges and latches have been replaced and the amount of cracking in the gel.

Frontier would probably sell for around $8,000 as it sits. Add the other items and it's a fairly priced rig
Thank you!
 

Forum statistics

Threads
186,855
Messages
2,888,762
Members
227,377
Latest member
blkcad
Top