Road to SEMA, A 90 day build ROUND 2

[Weldtec Designs]

Cargo glide add to the list of sponsors

We added another video of some of the craziness going on as the Road to Sema, a 90 day build continues! This build has been so much fun already and we are really excited about all the people who are joining in on this build.
@cargoglide.com just added to the build. We will be doing a rear bed slide that will give this van indoor?outdoor options...
Check out the latest video and make sure you follow this build on our social media pages.
https://www.facebook.com/weldtecdesigns/ or
https://www.youtube.com/watch?v=vecAwoJjaYo

Thanks for your support.

 

[philos]

Congrats on making your thread a sticky.
Now if we could just get that "parts for sale" thread over here to sticky land...


Sent from my iPad using Tapatalk

 

[Bbasso]

Congrats on making your thread a sticky.
Now if we could just get that "parts for sale" thread over here to sticky land...

X2!

 

[radorsch]

We added another video of some of the craziness going on as the Road to Sema, a 90 day build continues! This build has been so much fun already and we are really excited about all the people who are joining in on this build.
@cargoglide.com just added to the build. We will be doing a rear bed slide that will give this van indoor?outdoor options...
Check out the latest video and make sure you follow this build on our social media pages.
https://www.facebook.com/weldtecdesigns/ or
https://www.youtube.com/watch?v=vecAwoJjaYo

Thanks for your support.

Looking good, Jeremy! Just watched the videos. Nice! Looking forward to following the build.
Also just saw your rock sliders for the E Series. Those look sweet.

 

[chaseideas]

Hey guys, owner of Chase Ideas here - stoked to be sponsoring this build!

As a full-service digital agency, we're extremely proud to be a part of this project, and look forward to the exciting journey from here to SEMA.

Knowing Jeremy... this thing is gonna come out top-notch!


Check out the latest video below:

 

[Weldtec Designs]

Expedition Portal joins Road to Sema, A 90 Day Build.

Hey folks!
We are looking forward to another fun week of designing all the new front suspension components and a lot of building. We will make sure to post them up here as well as on our social media pages. If you are on social media please follow us, we will be having some nice Free giveaways to our followers! Who doesn't like free stuff......... Make sure you check out the video above and please share it on your social media.

With so much happening on a daily basis it is really exciting! We are really excited that our favorite forums has joined the build as a sponsor! Expedition Portal has been a great avenue to showcase our products and ability to build top notch suspension and accessories for the van community. With so many new products and builds to come we look forward to you seeing them first hand from concept to reality. We look forward to a continued partnership with Expedition Portal as we look to build our relationships with the amazing people on this forum.

Thanks for you support.

WeldTec Designs

 

[Weldtec Designs]

Road to Sema, a 90 Day Build rendering

Every day its a little something we get done or accomplished with this Chevrolet Express 3500 with Quigley 4x4 van build... Today was really exciting to get the rendering back from @keg-media.com They did such a great job handling this project understanding that time was one thing we don't have a lot of. This should help everyone see what our design concept is and look we are going for.
We would love to hear what you guys think.......

 

[radorsch]

That's a nice looking Chevy van!

 

[Jo_Duval]

lots of nice parts on this van!!

 

[goose175]

Very nice Job on the design - I love the steel bumbers! Looks like this is going to be an amazing rig. You got the right platform with the Duramax Diesel Engine!!!
Good luck on this build!

 

[Weldtec Designs]

Rear bumper with tire carrier by Competitive Metals

This week we have been finishing up the spare tire mount for the rear bumper. This one was a little more difficult with the way the door opens.



Quick action shot of Kyle getting down with the mig welder! You can tell there has been a lot of tube work in all of these parts, For that reason we are really excited about Competitive Metals being on board this build. They should be making another delivery today as we are ready to start the inside Roll cage! yep that's right...... We will be a 2" cage in this van, its going to be sick....

Stay tuned and make sure you follow this build on our social media....

Thanks
WTD

 

[Weldtec Designs]

Road to Sema, a 90 Day Build

With this build time more then half way over i wish we could say the same with the completion of what we are doing.... There is still so much we want to get done on this fun build. This week we are starting the cage along with the continued design of the front suspension. Every time we finish designing a new piece or part the excitement level increases, this new front suspension for the Quigley 4x4 is going to sweet.... Its going to make Redoval drool since he wants coilovers on his van soooo bad, Now i just need him to make some of his Vantage Optic HID head lights for the chevy vans.... hint .... hint....

Stay tuned.... please leave comments, feedback, requests...

 

[Wish41]

Thanks for the updates. Love seeing pics of the progress, so please keep that up. I am VERY interested in the new front suspension!

 

[REDOVAL]

We can't wait to be involved in this SEMA project and get Vantage Optics products in the headlights! This will also mark our first GM van light build so there will be product available soon to support this platform. Check out our website at www.VantageOptics.com, but beware it's in progress and needs lots of work...if only we weren't so busy building lights! Contact us with all of your custom headlight needs

Scott Thompson

Vantage Optics
www.VantageOptics.com
Facebook @VantageOptics
VantageOptics@gmail.com
424-250-0270

 

[Weldtec Designs]

aluminum jack mount

Thanks Scott we look forward to having your Vantage Optics lights on this build.

With this build it has been a blast getting to know other companies products and thinking about the van community that exists. We will be doing a full wrap on this build and are really excited about California Wraps joing in on this build. They do top notch work and specialize in full color changes on vehicles. Please check out there work and we look forward to showing you first hand the quality you get from this shop.
www.cawrap.com

Another product that we are adding to this build is our 3 ton aluminum jack mount and skid plate. Great for in the sand or in the shop. The aluminum mounting tray has 4 holes which makes mounting easy. With the pull of a pin the jack easily releases from the jack tray for use. The aluminum jack features an aluminum skid plate to prevent it from sinking in the sand or uneven surfaces. Still utilizing the stock wheels it freely moves along the concrete. We also supply you with 2 mounting brackets for the jack handle.
The jack mounted in the tray:

The bottom side of the jack:


For more info check out
http://www.weldtecdesigns.com/product/aluminum-jack-mount-3-ton/