I am interested in connecting my warn zeon platinum 10-s winch to a dedicated lithium ion battery, the max amp draw is 465 amps when pulling 10k lbs, not likely I run into this situation but always good to be prepared for it. Here is their chart with amp stepping based on load:
(sorry for formatting, was not allowed to post a link)
12V DC PERFORMANCE SPECS (first layer of drum)
Line Pull
Lbs.(Kgs.) Line Speed FT./min(M/min.) Motor Current
0 44 (13.41) 55 amps
2000 (910) 17.8 (5.42) 149 amps
4000 (1810) 12 (3.65) 233 amps
6000 (2720) 10.7 (3.26) 311 amps
8000 (3630) 7.5 (2.28) 387 amps
10000 (4536) 5.6 (1.7) 465 amps
The winch itself is 12V DC, so is this just as simple as wiring the winch to the isolated battery? Are there any other components you would recommend installing, like battery meter? Does a hybrid inverter gain me anything here? I can't see Jeep plugged into solar/shore power while winching so I am starting to think what kind of inverter I am running is moot at this point since there are not any other power sources involved. Would the inverter be responsible for the shore line hookup to recharge the lithium battery or do I need a separate component to manage that connection?
Is this a good battery to go with?
12V 100AH Lithium Ion Battery | Group 31
Model SB100
Group Size 31
Nominal Voltage 12.8V
Capacity (amp hours) 100AH
Charge Voltage 14.4v to 14.6V
Max Charge / Discharge Current 100A (amps)
Cold Cranking Amps 1000A (amps)
Length 12.75"
Width 6.5"
Height 8.7"
Weight 28 Lbs.
Type LiFePO4
Price $1,299.99
Would a different technology battery be recommended? I came across this post from 2009, not sure how accurate it is:
The simple answer is because you cannot safely extract energy that fast from any lithium-ion battery on the market today (even if some competitors claim a crank amp rating.) Sustained high rate discharges from lithium-ion batteries will cause dangerous electrolyte venting and explosive fires. After such an uncontrolled high rate discharge permanent damage is done to the individual cells. This is a characteristic of the Lithium-ion cell's chemistry and has been confirmed with our in-house Firing Circuits battery tester.
(sorry for formatting, was not allowed to post a link)
12V DC PERFORMANCE SPECS (first layer of drum)
Line Pull
Lbs.(Kgs.) Line Speed FT./min(M/min.) Motor Current
0 44 (13.41) 55 amps
2000 (910) 17.8 (5.42) 149 amps
4000 (1810) 12 (3.65) 233 amps
6000 (2720) 10.7 (3.26) 311 amps
8000 (3630) 7.5 (2.28) 387 amps
10000 (4536) 5.6 (1.7) 465 amps
The winch itself is 12V DC, so is this just as simple as wiring the winch to the isolated battery? Are there any other components you would recommend installing, like battery meter? Does a hybrid inverter gain me anything here? I can't see Jeep plugged into solar/shore power while winching so I am starting to think what kind of inverter I am running is moot at this point since there are not any other power sources involved. Would the inverter be responsible for the shore line hookup to recharge the lithium battery or do I need a separate component to manage that connection?
Is this a good battery to go with?
12V 100AH Lithium Ion Battery | Group 31
Model SB100
Group Size 31
Nominal Voltage 12.8V
Capacity (amp hours) 100AH
Charge Voltage 14.4v to 14.6V
Max Charge / Discharge Current 100A (amps)
Cold Cranking Amps 1000A (amps)
Length 12.75"
Width 6.5"
Height 8.7"
Weight 28 Lbs.
Type LiFePO4
Price $1,299.99
Would a different technology battery be recommended? I came across this post from 2009, not sure how accurate it is:
The simple answer is because you cannot safely extract energy that fast from any lithium-ion battery on the market today (even if some competitors claim a crank amp rating.) Sustained high rate discharges from lithium-ion batteries will cause dangerous electrolyte venting and explosive fires. After such an uncontrolled high rate discharge permanent damage is done to the individual cells. This is a characteristic of the Lithium-ion cell's chemistry and has been confirmed with our in-house Firing Circuits battery tester.
Last edited: