TheRenaissanceTinker
Active member
If anyone has a lead on a stripped down XV1 or XV2 on the west coast shoot me a dm. Looking for something to tow behind my E350 that’s a little bit narrower than the M1102 I currently have. Thanks!
Schutt Industries - Xventure Owners
- Thread starter Kevin Braun
- Start date
Kingsize24
Well-known member
You need this thing!
Offroad Trailer on 37s for Sale - East Tennessee - $3,000
Built this trailer out of boredom and I just don't need it. Never even used it other than pulling it around for a few days because it looked cool. Lol. I need something else to do now, so I'm selling this to start something different. Since the attached pics were taken, I've added a tongue...
forum.expeditionportal.com
TheRenaissanceTinker
Active member
Nope. That doesn’t check any of my boxes other than being a trailer and a reasonable price.
Kingsize24
Well-known member
Well good luck! Interested in seeing what you find.
TheRenaissanceTinker
Active member
Something closer than a 5 days drive hopefully 😂
TheRenaissanceTinker
Active member
That is typically caused by too much weight being behind the axle. Reorganize your gear with the heavy stuff forward of the tires.
eatSleepWoof
Do it for the 'gram
Load more weight in front of the axle, as far forward as you can. Ensure trailer is level. Ensure tire pressure is equal side to side and not over/under inflated for the weight.
Not sure what is going on but something doesn't seem right. Has it ever been in an accident ?
I was doing 70 mph in our 2019 ZR2 Colorado diesel and someone passed us like we were parked on the side of the road, doing about 90 & was towing an X-Venture X2. It was not swaying at all.
Is trailer sitting level with the ground when towing ? It should be.
Is it possible that the wind is getting under the rt tent and unweighting the tongue weight/hitch ?
Is it possible that the tow vehicle is squatting too much ?
Everything should be level with the ground when towing. 2 different heights is fine, as long as both are level with the ground.
Is tongue weight 15% of trailer weight ? It should be. I have towed the military trailers at 55 & no issues. Tracked straight. Something is amiss. Let us know if you figure it out please.
I am curious about the cause of your issues.
I was doing 70 mph in our 2019 ZR2 Colorado diesel and someone passed us like we were parked on the side of the road, doing about 90 & was towing an X-Venture X2. It was not swaying at all.
Is trailer sitting level with the ground when towing ? It should be.
Is it possible that the wind is getting under the rt tent and unweighting the tongue weight/hitch ?
Is it possible that the tow vehicle is squatting too much ?
Everything should be level with the ground when towing. 2 different heights is fine, as long as both are level with the ground.
Is tongue weight 15% of trailer weight ? It should be. I have towed the military trailers at 55 & no issues. Tracked straight. Something is amiss. Let us know if you figure it out please.
I am curious about the cause of your issues.
Last edited:
Anybody done any mods to their trailer? I've been thinking about a camper topper (ex. GFC, SuperPacific, Tune) OR a slide-in camper (ex. 4-Wheel Campers) modification to our XV-2. I see that SkinnyGuy Campers has a topper specifically made for the XVenture but not quite what I'm looking for.
A slide-in would be amazing (ex. 4-Wheel Camper). I imagine it would use turnbuckle hardware to attach to the rotating tie-down rings in the XV-2 bed. Not sure how to incorporate or work-around the current water heater mounted in the bed and water fill port in front of the passenger side wheel-well.
Not sure how a camper topper (ex. GFC, SuperPacific) would mount since the side bedrails are slightly different than a regular trucks bedrails. I don't think there's enough of a lip to secure with clamps. Lifting and securing the tailgate from the inside would be hard too.
My wife and I really like the idea of a "live-in" type system. Galley and everything else can remain the same. Anyone had similar thoughts? I am open to any suggestions. Thanks in advance!
A slide-in would be amazing (ex. 4-Wheel Camper). I imagine it would use turnbuckle hardware to attach to the rotating tie-down rings in the XV-2 bed. Not sure how to incorporate or work-around the current water heater mounted in the bed and water fill port in front of the passenger side wheel-well.
Not sure how a camper topper (ex. GFC, SuperPacific) would mount since the side bedrails are slightly different than a regular trucks bedrails. I don't think there's enough of a lip to secure with clamps. Lifting and securing the tailgate from the inside would be hard too.
My wife and I really like the idea of a "live-in" type system. Galley and everything else can remain the same. Anyone had similar thoughts? I am open to any suggestions. Thanks in advance!
Stuartg1943
New member
can you give me more details? Stuart stuartg1943 @hot...l.com or 843-368-6821 thanks