self stopping tire inflator?

[Loober]

Been searching around to find a self stopping tire inflator, kinda like the stunts for deflation that stop by themselves at a certain psi. Something that i can hook up to my quick disconnect turn on my OBA and not have to hold the lever down to inflate like on the conventional inflators. Thanks

 

[Loober]

Common someone has had to run acroos this in the past...

 

[4 play]

Hook a regulator in line with your oba. Set it to a pressure and got.

 

[matt s]

I don't know of auto shutoff, but my compressor has an air chuck that screws to the end of the stem. I just keep an eye on the gauge, no need to kneel and hold anything.

 

[I Leak Oil]

Hook a regulator in line with your oba. Set it to a pressure and got.

This is cheap and easy. As long as your compressor has a high pressure shutoff you'll be all set. If not plumb and wire one in.

 

[Gokracer1]

I have a set of Oasis/TrailHead Tire Deflators that I have set to 12 PSI, they stay calibrated and work a lot better then my previous Stauns.

I got them from a buddy of mine that has the best price around:


http://envy4x4.com/trailhead_deflators.html

 

[Hill Bill E.]

Like 4play said, set up one 'chuck' of your OBA with a regulator, and get an air chuck that clamps on the valve stem.

I did this with my 'OBA', which consisited of a small 3 gallon 110V compressor and an inverter:sombrero:

It took a bit to fill each tire from 10 psi to 32psi, so I set the regulator at 32psi, and attatched the clamp on chuck.

This allowed me to get everything else ready for the road, while the tires filled.