TooGouda
Active member
I totally have an itch to get one of the firepit / grill set ups too but i keep telling myself i need to focus on the IGT system first hahaResistance is futile you will be assimilated
I totally have an itch to get one of the firepit / grill set ups too but i keep telling myself i need to focus on the IGT system first hahaResistance is futile you will be assimilated
I totally have an itch to get one of the firepit / grill set ups too but i keep telling myself i need to focus on the IGT system first haha
Maybe this will help sway the love for the big pot; it really is a clever design:
View attachment 581017
As an aside, I think the lid tongs SP makes for their Micro cast iron pots will also fit on the tabs of the pan, although you gotta spread them pretty far apart. I tried it once.
I love the Micros too, especially the biggest one.
So you and a sale convinced me to pick one up haha. Any idea on what the second lifter pro (the straight, shorter one) is used for?
View attachment 586006
All the product shots I've seen online only show the longer one being used to take the lid off, but I haven't seen any pictures of the short one in use.
In hindsight, that was painfully obvious lol. Thanks!
Would you say that handle is secure enough to toss food in the skillet like so:







I have the Hexa Pro Tarp as well. Was thinking about getting the Inner Roof but wanted to see real-life photos of it in use as well as some reviews. Those are pretty much non-existent. Could you post photos of the actual Inner Roof in place? I am curious to how it is put together along with the Hexa Pro Tarp.Snow Peak did a “camp at home” event for anyone who wanted to participate over the Memorial Day holiday. So I decided to pull out some of my gear. This was my first time setup of the Hexa Evo Pro tarp. Very easy process, I did it myself. I also have the Tabiki Tarp Hexa Inner Roof which enables you to set a fire pit under the tarp. It came in handy during a rainy Saturday. The fabric feels like a heavy cotton. According to the SP website it’s made of aramid, a fire resistant fabric used to make fire fighting suits. It handled the camp fire fine.
View attachment 588892View attachment 588896View attachment 588897
The only photo I have that shows the inner roof is the night shot in my previous post. It shows the tarp with the inner roof and the fire pit underneath. I didn't take many pics of the inner roof because it was pretty nondescript, and I've since taken down the tarp. The inner roof is grey in color and blends in with the Evo Pro tarp to create a seem less roof line. I attached the manual so you can see the setup instructions. My Evo Pro tarp was already setup so I just had to add on the straps to the poles and then connect the inner roof to the straps (see manual). Tighten up the straps and then attach the sides which use bungee cords. The Evo Pro tarp comes with two 3 meter cords to secure the sides of the tarp, one for each side. I like the sides of the tarp raised up for easier entry, so I use 180 cm tarp poles to raise the sides. The manual recommends if raising the sides of the tarp, to secure the side tarp poles with two tie down straps. Normally I would use one strap to secure the tarp pole on the side, but in a wind the pole does move around. Since I putting a fire pit under the tarp I wanted everything secure in case the wind picks up. The first pic in my previous post shows the side tied down with one cord. I didn't have the inner tarp setup in that pic. In the last pic, I have two cords securing the side tarp pole. After I had it all setup, the Evo Pro tarp with the Inner Roof was very secure. It held up fine during a windy and rainy afternoon. I attached a photo I found online on securing the tarp to the poles to prevent it from blowing off the poles in windy weather. I did that to the main poles but not the side poles -- next time!I have the Hexa Pro Tarp as well. Was thinking about getting the Inner Roof but wanted to see real-life photos of it in use as well as some reviews. Those are pretty much non-existent. Could you post photos of the actual Inner Roof in place? I am curious to how it is put together along with the Hexa Pro Tarp.

I really would like to pick up something that would function like the CK-127 steel side tables...
Any idea what this is for?