For sale, 2002 FWC Hawk shell model, $1000 or BO.
Turtle lake, Wisconsin
Factory installed options; furnace, extended bed over cab, and pull out couch.
Custom built cabinet with pull out drawer for 12 volt compressor fridge (Sized for an ARB MT40 or Engel), sink, faucet and 6 gallon water tank.
The camper is in OK shape for its age. It suffered some damage during a tornado event in 2019 but is fixable for somebody who is handy and has the time. It has some small cosmetic dents in the roof but nothing structural. The plastic cover on the vent was broken and I replaced that. The aluminum frame was tweaked where the over cab bed meets the front of the camper. I straightened this but a small weld in the aluminum frame needs to be repaired. The rear lift panels need to be replaced due to a past broken vent cover and leak. I camped with it a couple of times after the storm damage occurred and before my replacement camper was delivered in 2021. Everything worked the last time I used it. I kept this camper for my son as he was going to rebuild and update it for himself. Unfortunately he's not had the time to work on it so it has sat for the last 4 years. I don't want it to sit any longer so I've told my son I'm going to sell it. it is a great base for a project to make it how you want it.
Other facts:
The bed mattress and couch have no rips or tears in the fabric. As far as I know all the mechanicals work.
Dry weight 680 lbs.
Fits 6.5' full size box
20lb propane tank
12 volt AGM Deep Cycle
Turtle lake, Wisconsin
Factory installed options; furnace, extended bed over cab, and pull out couch.
Custom built cabinet with pull out drawer for 12 volt compressor fridge (Sized for an ARB MT40 or Engel), sink, faucet and 6 gallon water tank.
The camper is in OK shape for its age. It suffered some damage during a tornado event in 2019 but is fixable for somebody who is handy and has the time. It has some small cosmetic dents in the roof but nothing structural. The plastic cover on the vent was broken and I replaced that. The aluminum frame was tweaked where the over cab bed meets the front of the camper. I straightened this but a small weld in the aluminum frame needs to be repaired. The rear lift panels need to be replaced due to a past broken vent cover and leak. I camped with it a couple of times after the storm damage occurred and before my replacement camper was delivered in 2021. Everything worked the last time I used it. I kept this camper for my son as he was going to rebuild and update it for himself. Unfortunately he's not had the time to work on it so it has sat for the last 4 years. I don't want it to sit any longer so I've told my son I'm going to sell it. it is a great base for a project to make it how you want it.
Other facts:
The bed mattress and couch have no rips or tears in the fabric. As far as I know all the mechanicals work.
Dry weight 680 lbs.
Fits 6.5' full size box
20lb propane tank
12 volt AGM Deep Cycle
