SOLD - Hannibal 1.9m Awning in Goodyear AZ (Phoenix Area)

HighRideBOV

New member
Back in May I traded a set of tires and wheels for this new Hannibal Awning Kit. Last week I listed it here on the forums, but it turned out I did not have the model of awning I thought I did. So this is the new listing with the correct information.

I'm listing the awning for sale, because I am in the process of selling my 1989 Chevy Suburban, so I no longer have use for the awning kit. As previously mentioned the kit is out of the package and does not include the little hardware bag of the nuts and bolts used to bolt it to a roof rack, but everything is there for the awning. You will have to supply your own mounting bolts, but you can pick those up at any hardware store.

The manufacturer lists the dimensions as:

Closed - Length 1.9m - Width 15cm - Height 15cm
Open - Length 1.9m - Width 1.7m

Hannibal's Australia site list these for $960AU (about $1008US)
Asking $650 for the kit.

IMG_0507.JPGIMG_0509.JPGIMG_0506.JPGIMG_0510.JPGIMG_0511.JPGIMG_0512.JPG
 
Last edited:

HighRideBOV

New member
I will lay it out in the morning and connect the crossbar to the support arms and measure from the points of connection.
 

HighRideBOV

New member
How far apart in inches are the mounting points? THANKS!

I measured the crossbar which locks into the arms when deployed (shown in this video at the 0:28 mark) and the distance from end to end on the pole is 67.5in. This would be the same distance for the mountings of the arms.

I sooooooo want this! Just don't have the funds right now... :( Good luck with your sale! :)

Thanks jeepdreamer.
 

Forum statistics

Threads
189,620
Messages
2,918,968
Members
232,571
Latest member
Psyph
Top