Summitbeerowl's 93 Toyota Truck Build
- Thread starter Summitbeerowl
- Start date
screwball48
Explorer
I have had a couple of 22RE trucks with a Flowmaster. The Ole butt dyno noticed a difference over a stock style muffler. The engines just seemed to work a little freer. The exhaust tone was noticeably different yet still not "ricer".
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
FJOE
Regular Dude
Beautiful truck, and very well executed. If you would like to add a second tow hook up front, here are the Toyota part numbers (FYI, it was about 34.00 shipped)-
51961-35020
HOOK, FR
51963-35080
STOPPER, FR HOOK WIR
90101-12176
BOLT, HEXAGON (x2)
94621-11200
WASHER, PLATE (x2)
51961-35020
HOOK, FR
51963-35080
STOPPER, FR HOOK WIR
90101-12176
BOLT, HEXAGON (x2)
94621-11200
WASHER, PLATE (x2)
Summitbeerowl
Adventurer
Ya, gotta get that soon. Been looking at a lot of graphics but haven't found the right one yet. Probably need a graphite colored one. Thought about some chrome TRD emblems to put on the front fenders just in front of the doors. Like to have something SR5 expedition on the back fenders.
Summitbeerowl
Adventurer
Found a little snow. ��
Last edited:
Summitbeerowl
Adventurer
Thanks qton. No modification was necessary to mount the Bushwhacker flares. The fit is very good and don't seem as cheap on as when you first pull them out of the box. I still think they are over priced for what they are made of but I sure like the finished look they give.
BTW I do like the white 93. Looks very clean. There's something about white that always looks good.
Summitbeerowl
Adventurer
Received the flowmaster!
Summitbeerowl
Adventurer
Installed!
Summitbeerowl
Adventurer
Well, haven't been on for a while. Been camping and kayaking with the truck though.
I think it's time for figuring out the roof rack.
From my calculations it looks like the perfect size rack might be the Yakima Mega Warrior with the extension.
Has anyone installed one of these on a fiberglass topper? I would like to mount it directly to the topper and then use the rack as the bars to mount the kayak brackets on to carry them on top of the Megawarrior.
I emailed Yakima but the response I received was of no help what so ever. They want me to buy all the crossbars and roof mounts and then put the basket on top of that. I'd like to have the Megawarrior fairly permanently mounted and would like to keep it as low as possible.
Any thoughts?
screwball48
Explorer
I have saw where individuals have used the factory roof rails off of A Jeep Cherokee or Grand Cherokee so they could then use Yakima products.
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
Summitbeerowl
Adventurer
Thanks.
I was thinking maybe using a track from either Yakima or rhino. That way I could attach the basket anywhere.
I was thinking maybe using a track from either Yakima or rhino. That way I could attach the basket anywhere.
Scott B.
SE Expedition Society
I've seen a mount someone made that did not use the Yakima racks.
IIRC, he used aluminum blocks about 2" tall, and through bolted the rack, mounts and blocks to the shell. Once you see the Yakima mounting system, it will make sense.
If you change your mind, and decide on a Load Warrior instead, I have one with the extension I am selling.
IIRC, he used aluminum blocks about 2" tall, and through bolted the rack, mounts and blocks to the shell. Once you see the Yakima mounting system, it will make sense.
If you change your mind, and decide on a Load Warrior instead, I have one with the extension I am selling.
Summitbeerowl
Adventurer
I appreciate your offer but I think the Megawarrior would probably be a better fit.
I can see the block idea working.
Although using the track I would think bolting it on shouldn't be too difficult.
I am concerned if the rack is strong enough without the rails under it???