The Unnamed - 2019 Ram Power Wagon Build

[St8ton]

Nice,I have the Thuren TB and the Hellwig RSB as well.What brand was the rear coil spacer, I am thinking of doing the same mod.Thanks.

The spacers I used are Traxda, part number 605041. They are metal and a simple install.

 

[St8ton]

How is articulation affected by the airbags?


Sent from my iPad using Tapatalk Pro

Articulation is not affected by the airbags. The lower portion of the bag is not attached to the axle, I'm using the Daystar Cradles to capture the lower and provide free movement for articulation.

 

[HeliNomad]

Articulation is not affected by the airbags. The lower portion of the bag is not attached to the axle, I'm using the Daystar Cradles to capture the lower and provide free movement for articulation.

That's cool.

 

[nater]

@St8ton Any chance you could share details of the cowl mount NMO set up for the @MidlandUSA antenna? Looking for an NMO plate, and figured you already ran this gauntlet? Any close up pictures?

 

[chet6.7]

The spacers I used are Traxda, part number 605014. They are metal and a simple install.

Thanks,that is the brand I would use.
Did you notice any difference in the way the rear handles?

 

[Big Swede]

The spacers I used are Traxda, part number 605014. They are metal and a simple install.

Is that supposed to be 605041? Thanks

 

[St8ton]

Is that supposed to be 605041? Thanks

Crap, yes. I'll fix it. Sorry about that. And thanks for catching it.

 

[St8ton]

@St8ton Any chance you could share details of the cowl mount NMO set up for the @MidlandUSA antenna? Looking for an NMO plate, and figured you already ran this gauntlet? Any close up pictures?

It's a simple flat bracket I made. Just get the NMO flat mount from Midland and figure out how far out you want to be on the A-pillar light mount. I'm using the BajaDesigns light mounts, just attached the bracket off of that.

 

[St8ton]

Thanks,that is the brand I would use.
Did you notice any difference in the way the rear handles?

With the rear coil spacers? No, nothing out of the ordinary.
Now, with the rear trackbar and sway bar...that made a hell of a difference.

 

[chet6.7]

With the rear coil spacers? No, nothing out of the ordinary.
Now, with the rear trackbar and sway bar...that made a hell of a difference.

Yes,the rear spacers,is a longer shock required? I agree on the rear bars,the Thuren bar is what the Ram engineers should have done in the first place.

 

[DBNeuhaus]

Do you happen to have a part number for the hellwig sway and adjustable links? The website doesn't seem to show a model fit for 19+ 2500's. Although I assume the 18 will fit. Thanks.

 

[St8ton]

Update time!

Few small bits added...

New Bulletpoint Mounting Solutions mic holder

Added the Fox ATS Steering Damper
Tight fit but it works well. Simple single bracket install and adjust to you liking. Jury is still out on if it's worth the price tag.
(Sorry for the crappy photo)

New tool for those downed limbs or quick fire wood processing.

 

[St8ton]

Here is a bit of an explanation for what's going on in my rear end. For all the inquiring minds.

 

[St8ton]

Got my hands on a RSI Smartcap EVO

Added some HardKorr Lighting LEDs with a panel I made for the switch control

 

[BuckinghamBuilt]

Here is a bit of an explanation for what's going on in my rear end. For all the inquiring minds.

I have been considering the airlift bags paired with daystar cradles for my 2020 PW. Was this direct bolt-on or did it requires some drilling?