Unimog longer wheel studs

[Eddie b]

Hi does anyone know where to get or have a part number for the longer wheel studs and nuts to fit a Australian Army unimog. I want to fit 395x85x20 xzl’s with Hutchison alloy wheels any help on this would be greatly appreciated thanks Eddie b

 

[charlieaarons]

you could try A000 401 2971 85mm long 22mm diameter

 

[Eddie b]

Thanks Charlie do you know where I could get them

 

[Fugly]

Mate,
You could try Unidan on the gold coast ....
Or there is a mob in Canberra that has parts.....
I think it may be MOG Central.......not sure....

 

[Eddie b]

Mate,
You could try Unidan on the gold coast ....
Or there is a mob in Canberra that has parts.....
I think it may be MOG Central.......not sure....

Thanks mate

 

[charlieaarons]

Try Neil Webster at merex.de parts dept in Germany. It has a 22mm shank and thread. Just out of curiosity what is the offset (“ET”) of your wheels? Mine are 90mm, which means my track is 142mm wider (1970mm), makes the tipping angle about 2.5 deg greater

 

[Sitec]

Hi fella. Where are you based? Independent Components in Adelaide has a large selection of Mercedes Truck parts... If they're the same 10 stud pattern and style as a prime mover, I have a donor Mercedes 1734 which had alloys on it... Only the front hub would suit your application as the rear studs are really long for dual alloys.. Not sure if they're compatible though...

 

[Iain_U1250]

Mog Central has them by the drum load

 

[Eddie b]

Hi fella. Where are you based? Independent Components in Adelaide has a large selection of Mercedes Truck parts... If they're the same 10 stud pattern and style as a prime mover, I have a donor Mercedes 1734 which had alloys on it... Only the front hub would suit your application as the rear studs are really long for dual alloys.. Not sure if they're compatible though...

Thanks i’ll Give them a call

 

[Eddie b]

Try Neil Webster at merex.de parts dept in Germany. It has a 22mm shank and thread. Just out of curiosity what is the offset (“ET”) of your wheels? Mine are 90mm, which means my track is 142mm wider (1970mm), makes the tipping angle about 2.5 deg greater

 

[Eddie b]

The wheels I am getting will make my track about 180 mm wider 2460 mm

 

[millroad]

The wheels I am getting will make my track about 180 mm wider 2460 mm

Hello! curious if you used hutchinson alloys with or without adaptor plate? Trying to sort out the wheel question myself?
Regards Markus

 

[Eddie b]

Yes I’m using Hutchinson alloys 10 stud fits without adaptor plate