4x4B190
New member
Hi everyone,
Several years ago, I began a chassis swap. I put the body of a 1989 Airstream B190 (Ford E350) onto a 1992 E350 with a Quigley 4x4 conversion and 7.3IDI. We got it to the point where it ran and drove (though the E4OD wouldn't shift by itself), but the project stalled for a number of personal reasons.
I now want to finish the project, but the guy who was doing all the work for me is no longer available.
The RV electronics are complete, but they are not wired into the drivetrain. That is the main job. There are a few additional matters that need fixing, such as one of the fuel tanks needs a new sending unit.
Does anyone here know someone who would be able and willing to work on this project for me? I'll pay well.
The van is located in St. Louis, MO, but I could get it transported to someone's shop.
Thanks for your help.
Several years ago, I began a chassis swap. I put the body of a 1989 Airstream B190 (Ford E350) onto a 1992 E350 with a Quigley 4x4 conversion and 7.3IDI. We got it to the point where it ran and drove (though the E4OD wouldn't shift by itself), but the project stalled for a number of personal reasons.
I now want to finish the project, but the guy who was doing all the work for me is no longer available.
The RV electronics are complete, but they are not wired into the drivetrain. That is the main job. There are a few additional matters that need fixing, such as one of the fuel tanks needs a new sending unit.
Does anyone here know someone who would be able and willing to work on this project for me? I'll pay well.
The van is located in St. Louis, MO, but I could get it transported to someone's shop.
Thanks for your help.
Last edited:
