ThundahBeagle
Well-known member
Rodent Of Unusual Size?
Urban 'Burban
- Thread starter Boyink
- Start date
Boyink
Member
Yep!
Overlandtowater
Well-known member
. I love vanity plates.
ITTOG
Well-known member
How in the world did you guess that. I would never come up with that but I have never heard that phrase.
Overlandtowater
Well-known member
Someone just watched Princess Bride.
ThundahBeagle
Well-known member
Surreal that it happened that way. One may or may not have always agreed with his views, but he made some great moviesRIP Rob
Boyink
Member
Makerpipe-based side cabinet roughed in. This will sit behind the driver's seat by the rear door and hold:
- 12V Fridge
- (3) 2.5 Gallon Scepter water jugs
- Ecoflow house battery
- Zip-Dee lawn chairs (standing up in the narrow center space).
- Switch panel for all house electric circuits
- Permanently-mounted 12v boat/RV fan
- Stereo amp on the floor under the water jugs
Notes:
- Most faces will get skinned with wood to look more like a traditional cabinet.
- All verticals will get trimmed and capped once I confirm heights are corrent.
- The lower-height section on the right completes the bed on the passenger side.
- Angled corner section matches the Suburban body contours in that spot.
- Depth is roughly half of the back seat space to the middle of the transmission tunnel. I'll get some cabinet space on the inside. Idea is to keep the passenger side floor space open for entry/exit.
- I might build a drawer for the water jugs, will try a fixed shelf first.
- The battery ended up between two former rear seat mounts, so a nice secure mount will be easy.
I'll trim this center section down to match the height of the fridge. It'll still be taller than our chairs.
Battery has some room for wiring and Ecoflow DC to DC charger:
This approximates where three jugs will end up, remaing space will be enclosed for storage.
- 12V Fridge
- (3) 2.5 Gallon Scepter water jugs
- Ecoflow house battery
- Zip-Dee lawn chairs (standing up in the narrow center space).
- Switch panel for all house electric circuits
- Permanently-mounted 12v boat/RV fan
- Stereo amp on the floor under the water jugs
Notes:
- Most faces will get skinned with wood to look more like a traditional cabinet.
- All verticals will get trimmed and capped once I confirm heights are corrent.
- The lower-height section on the right completes the bed on the passenger side.
- Angled corner section matches the Suburban body contours in that spot.
- Depth is roughly half of the back seat space to the middle of the transmission tunnel. I'll get some cabinet space on the inside. Idea is to keep the passenger side floor space open for entry/exit.
- I might build a drawer for the water jugs, will try a fixed shelf first.
- The battery ended up between two former rear seat mounts, so a nice secure mount will be easy.
I'll trim this center section down to match the height of the fridge. It'll still be taller than our chairs.
Battery has some room for wiring and Ecoflow DC to DC charger:
This approximates where three jugs will end up, remaing space will be enclosed for storage.
Boyink
Member
First pass at this cabinet was too big. Gave up on the extra storage, took 5" out of the width, and much happier with the fit now.
It'll still accomodate all the core items and on the interior side if I need to add MOLLE panels or something to the skin it'll be easy to do.
Definititely appreciating the MakerPipe-based build for this. I was able to modify the structure in about an hour. If I had started with wood I think it would have been a total do-over.
I need to modify the wiring on the stereo amp, and then it will slide under the bottom shelf.
Ended up with decent amount of margin for the driver's seat position, and a nice storage spot on the floor.
It'll still accomodate all the core items and on the interior side if I need to add MOLLE panels or something to the skin it'll be easy to do.
Definititely appreciating the MakerPipe-based build for this. I was able to modify the structure in about an hour. If I had started with wood I think it would have been a total do-over.
I need to modify the wiring on the stereo amp, and then it will slide under the bottom shelf.
Ended up with decent amount of margin for the driver's seat position, and a nice storage spot on the floor.
Similar threads
