Use_the_2nd
Observer
Dipped outta work early to put the 3rd and final coat of herculiner on
Usethe2nd 2011 build. Sliders COMPLETE
- Thread starter Use_the_2nd
- Start date
Use_the_2nd
Observer
Well it's all wrapped up and looking good, just have to wait till my new Hi-lift gets in!
EscapeDivision
New member
I'm diggin' your approach and the way you're knocking this stuff out!
Bed rack looks much nicer and cleaner now that it's coated. Good stuff.. keep it coming! :beer: What's next?
Bed rack looks much nicer and cleaner now that it's coated. Good stuff.. keep it coming! :beer: What's next?
Use_the_2nd
Observer
Thanks!
That's the question, I'm thinking a spare tire mount on the sloping edges of the rack, only issue is that I'm not 100% convinced I want to keep these wheels, so I'm hesitant to pick up a fullsize spare until I decide.
I also need to find a box that'll fit in between my jerry can holders and fasten that down or I could make a solid mount for my cooler that I'll be using.
I really wish my RTT was in, hopefully it won't be much longer, I want to do some test runs before elk season.
Use_the_2nd
Observer
I forgot to put up some pictures of my dog platform I made for the rear
Use_the_2nd
Observer
Thought today would be a good day to head out fishing with my brother and cousin, so I loaded up the little boat in the back!
Use_the_2nd
Observer
Did a little exploring on top of the pass today
Use_the_2nd
Observer
Got a tow strap mounted.
On a sadder note we had to put my brothers dog down. It involved his first and only ride in my truck
On a sadder note we had to put my brothers dog down. It involved his first and only ride in my truck
Use_the_2nd
Observer
My Tepui Ayer tent will be in next week!! Pumped to finally mount it and head out with my GF for a camping trip!
Use_the_2nd
Observer
Got my tent in today!!
Use_the_2nd
Observer
Well, I purchased a snorkel. All the reviews gave this maker top ratings, unfortunately it's meant for a LC80...worst comes to worst I'll be out $70, that's right $70. I'll post a update when it's here late next week
Use_the_2nd
Observer
I managed to make an LC80 snorkel fit on a Tacoma :victory:
Adventurous
Explorer
Nice! Mind sharing some more details as to what you had to do to get it to fit? From the looks of it it follows the body lines just as well as the Tacoma specific snorkels do.
Did you get this one?
http://www.amazon.com/Snorkel-Intake-Toyota-Series-Cruiser/dp/B00B90PPGY
Did you get this one?
http://www.amazon.com/Snorkel-Intake-Toyota-Series-Cruiser/dp/B00B90PPGY
Use_the_2nd
Observer
Yep, that's the one. Geez, where to start? The only hole that lined up was the main inlet tube, besides that the rest was worthless. The template, A-pillar bracket, and rivets were all a joke. I had to put paint on the end of the studs to locate the mounting holes on my fender, custom make a pillar mount along with drilling the pillar to accept rivnuts and very carefully heat up the tube and use a piece of piping to form it around my antenna mount.
For $67 shipped you can't really argue if your willing to put in the work. The main tube itself is stout and well made.
Similar threads
