What did you do to your Expo Jeep today?

[Yarjammer]

Recieved and installed my Gobi yesterday. I can't wait to get it loaded up! As usual with new Jeep parts, I now have another follow on project or two. I need to relocate my antenna, wrap the ladder and load bars with non-skid, and attach my kayak racks and fishing rod tube.

 

[Klink]

A couple weeks late posting this up, but installed:

- Rock Krawler 2.5 Max Travel lift
- Bilstein 5100 Shocks
- EVO 44 Magnum Sealed Axle Sleeves
- EVO C2 Gussets
- Tom Wood's Front Drive Shaft
- Recon 10,500 Pro Performance Waterproof Recovery Winch with Synthetic Line

Had just a little bit of sand in my axles

And going on this weekend, an EVO ProTek Skid System, (Oil Pan, Transmission, Exhaust Cross Over)

 

[Modeler]

Started paint stripping and grinding rust off the rear bumper/tire carrier. It is a Bserk/Groundpounder Fab that arrived unpainted. I followed my normal prep work for raw steel and painted with a brand of primer and paint that I had never used before. Within one year it was faded, bubbling and blistering, in another six months it had turned gray and the paint was falling off. I won't use Duplicolor ever again. Items that I have primed and painted from the same raw steel using good old Rustoleum have lasted 3 times as long and still haven't faded either.

 

[Septu]

Washed ~330 lbs of mud off (152 kg according to the weigh scales).

Some guy got his truck stuck 16km off the road behind Lake Laberge here in Whitehorse. So me and a couple buddies went back there to pull it out. This is what wide aggressive tires, narrow fenders and tons of mud gets you. The mud on the hood is over 1" thick.

 

[Dan Grec]

Washed ~330 lbs of mud off (152 kg according to the weigh scales).

Some guy got his truck stuck 16km off the road behind Lake Laberge here in Whitehorse. So me and a couple buddies went back there to pull it out. This is what wide aggressive tires, narrow fenders and tons of mud gets you. The mud on the hood is over 1" thick.

Woah, looks like I missed out!
Hopefully next time.

-Dan

 

[iluv83vettes]

Washed ~330 lbs of mud off (152 kg according to the weigh scales).

Some guy got his truck stuck 16km off the road behind Lake Laberge here in Whitehorse. So me and a couple buddies went back there to pull it out. This is what wide aggressive tires, narrow fenders and tons of mud gets you. The mud on the hood is over 1" thick.

F that noise.

 

[Brandon Libby]

And took and epic picture of my copilot

Such a regal looking pup!

 

[Zimmanski]

Such a regal looking pup!

Thanks! Haha yea she's pretty majestic

 

[profdlp]

Such a regal looking pup!

Looks like she's campaigning. What's she running for? :sombrero:

 

[Zimmanski]

Looks like she's campaigning. What's she running for? :sombrero:

Haha whatever it is, she could probably do a better job than most of our elected officials

 

[profdlp]

Haha whatever it is, she could probably do a better job than most of our elected officials

No doubt about that. Heck, I'll vote for her. :victory:

 

[kojackJKU]

Finally got the clunk figured out in my front end, after 2.5 years of looking. It was the sway bar mount bushing. the one that mounts the bar to the chassis. THANK GOD. I was going bonkers trying to chase that down. Changing everything up front. My jeep feels new again. This week, she's getting some TLC in the form of a good throttle body cleaning, PCV valve, new plugs and im ordering an AFE dry drop in filter for the stock intake. New wheels and tires are on the way.

 

[jpat30]

Finally got around to changing out my Skyjunkers, they were toast, for some sweet Bilstein 5100s. The jeep rides better than new

 

[Scooter Scott]

Changed the oil...does that count?

 

[Jeeptrip Pete]

Finally installed my Iceland Offroad bumper on the WJ. Still need to get the winch installed in it though.

Pete