What have you done to your Land Cruiser Today?

[Fonty]

Replaced the drag link ends at a campground in La Paz, Mexico. After 400,000+ km they were a bit worn.

 

[Box Rocket]

finished the suspension install on my '95

 

[The_Jayhawker]

Fresh oil change and new front door speakers!

 

[temple]

finished the suspension install on my '95

What did you i stall?

 

[MikesVX80]

Fresh oil change and new front door speakers!

What size speakers are the OE fit/replacements, please?

 

[MikesVX80]

Perhaps the most relevant modification of all... Sadly they sent the wrong colour, as next up is tinted windows, so white replacements are on their way!

 

[Box Rocket]

What did you i stall?

OME J springs
OME L shocks
1.5" coil spacers
sway bar drops
extended brake lines
adjustable panhards
Slee Caster plates
DC front driveshaft
extended diff breathers.

 

[CreeperSleeper]

Last night I used Right Stuff on the sunroof where it was leaking between the glass and the rubber seal. I also pulled the 3rd brake light, cleaned the foam "gasket", and sealed it back up with Right Stuff... Last but not least, I spent 2 hours with a heat gun, ShopVac, and paper towels trying to get all the water out of my carpet.

 

[LexusAllTerrain]

New Magnaflow Catalytic converter, New Muffler, both Oxygen sensors, and still working on getting rid of my P0130 and P0133 codes!

I did not had them before and I did all this PM because of the miles (144k) getting ready for my next long drive trip in March!

 

[ChuckB]

Ordered some Slee Step-sliders and Cooper ATPs in 275/70-18 pics to come when everything is installed.

 

[Box Rocket]

Painted wheels
Ordered Trail Gear sliders.

 

[The_Jayhawker]

Removed corny window vent shades, removed third seat mounting brackets and belts, fixed pass side rear window that had come off track.

 

[hairy_apple]

Got the bumper on, and the got the winch mounted up. One of the solenoids crapped out, so I ordered a solid state controller for it, should be up and kicking again Monday or Tuesday. Sorry for the terrible picture.. I'll get better ones tomorrow.

 

[vrshack]

Cutting sheet metal to clear 38.5 xmls. Got all four corners cut, now I just do a Lil fabrication. Lopped off the factory rear bumper and trimmed the Frame horns.

 

[vrshack]