Recent content by gadcustoms

Tires are 33x10.5 sprung on a 3500 lb axle, has a heavy duty 2 inch bulldog coupler, all lighting is LED, doors are 26x32

***SOLD*** Located in Liberty, UT Asking 11,000 OBO I am selling my teardrop trailer I built from the ground up. It is 5x9 with a sleeping area of about 5x7, sleeping area has a queen size mattress with cabinets for storage. Galley in rear hatch has sink with hot and cold, 13 gallon water...

http://teardroptrailerparts.com/LED_Porch_Light.html I've used these and like them they don't light up your entire camp but they put out enough for my needs.

This has turned into quite an off subject thread I think we should bring is back to what it was. Moby1 has built a bad *** trailer! One that I am sure a few companies out there might get some ideas from.

Agreed, I am just trying to prove that it's not a low grade because of the brown streaks. I buy a ton of the B grade from three different suppliers for my cabinet shop and it all seems to have brown streaks on one side or another.

Grade "B": This is a selected one piece face, which is generally light and even in color. Some very small, closed, pin knots may be allowed, as well as some brown streaks. No patches, voids, or material streaks are allowed. The surface is well sanded. Grade "BB": This is a one piece face...

Seams like a strong opinion when I don't really see a picture of good enough quality to tell grade. Having looked at several of Moby1's other photos it looks like they are using a good grade of baltic birch. As far as 4B grade never heard of it the only grades I have ever seen available are...

Flojet makes a really nice 2.9 gpm 12 volt pump that pumps steady at 50 psi, it works great with on demand water heaters because it eliminates the pulsation you get from other pumps which will cause your heater to sit there and kick on and off. I like to run the pump right off of the tank into...

Teardrop! I love my teardrop. But at the same time I think every trailer has its ups and downs I am actually going to do another trailer similar to a Horizon that way I have a trailer for every need. Here is a link to an add I posted for my teardrop if you wanna see more photos...

Here is what I built myself that I am in the process of getting into production, I built this as a prototype to see what type of response I would get. I am going to try to make it to the expo for a little more exposure and to get a little more feedback on my build.

I think anodizing is a chemical process so as far as I know they only have the stuff I used which is satin anodized or a dark bronze anodized other then that I think you would have to paint it.

I think that's real close to what I paid. I used 062 on my side walls and roof and 040 on the curves, I liked the way the 040 looked 062 didn't want to conform as well as I had hoped.

Yeah kinda they have a minimum purchase which is a lot. So I just stock piled some for future builds.

Anodized Aluminum.

Here is the link to my for sale add it has a few more photos if interested in seeing. http://www.expeditionportal.com/forum/threads/86956-Off-road-Expedition-Trailer-Utah