Search results

Think about how much "nimble" is needed in NZ-- not so much outback like Oz or the Americas, more developed campgrounds and graded roads than old stream-beds and wild camping. If you can get out of mud, you can go nearly anywhere on the islands... but a good turning radius helps.

I have some experience with compressors and specifically with the ARB (brushed) single. Today I looked into why my second ARB compressor can't hold air for more than 5 (actual) seconds, it's because it's leaking from the end seam, just like the first one. Not repairable, just trash now. Is this...

Yes, compared to AGM, Lithium is a different order of magnitude of functionality. 70% Lighter makes a difference every day, consistent output voltage is really nice and 90% useable capacity is huge compared to lead batteries. Add to that more than 3 times the number of cycles in it's lifetime...

These are good fridges, well-built with a strong compressor, the cover and remote are a nice bonus-- That said, the electronics are the weak point . I replaced my control module once and might have to do that again 7 years later.... but Snomaster walked away from the international market in '22...

Get a different controller, why be responsible for keeping yours alive? I've been using a single Victron controller for the last 9 years with a few different panels and batteries, spends most of its life parked under streetlights, no loss of function on the controller or charge on the...

x2 for Explorist.life, great site & company. Worth knowing is that Victron routs support and warrantee issues through the vendor you bought from, so if that's Amazon, you're probably s.o.l., but if it's Explorist, the service will be top notch.

I think you'll be happy with the cleaner install and easier upgrades-- Breakers for switches are a good call, but fuses are much cheaper. If you design your system well, you won't really use either very often, so quick-to-check and out-of-the-way become chief virtues.

Excited to see the start of this! I think you'll love the pop-top, even a little space out of the weather and bugs is a huge change for the better--you won't miss that little bit of being outside all the time. Keep us posted, this looks like a fun project & plan-

Helium is expensive as :poop:, might as well pay an uber driver to get it out of your sight-

Bigger brakes have pushed up wheel sizes, so folks with slow-to-stop Nissans have fewer choices! I still run OEM 16" on my frontier and put skinny tires on them, but there are not so many choices. Nokian makes great snow tires in 32" and the Cooper ST Maxx and some Mikey Thompsons are available...

You might consider the Blue Sea 7748 fuse panel; rated for 200-amps (which should work with your battery) and is essentially a fused buss-bar. The larger MIDI fuses work well for larger inputs like the solar and DC-DC (not sure what the convertor on your diagram is, AC input?), the smaller...

If you plan to connect to-shore power, why not save $4400 and use a portable electric heater/radiator or 2?

Roof mounted toaster oven! Most people attach that to the rack outside, but you obviously use yours- I tip my hat to you, Sir!

For electrical systems Explorist.life is a great company with really good tutorials and support as well as very well thought-ought packages of components. This won't necessarily help you design the whole of your system, but it can supply the major pieces that every system might use, then you get...

The van is missing a few things, and Herbie is right that fuses are the big one. Any power source should have a fuse in the first 12" of wire, same with any step-down in wire size. Fusing the negatives in a metal vehicle is really poor design--if anything shorts on the body or frame it will...

the D40 Frontier/Navarra has the same payload in the US as in Australia, but over there they use Kg! I think with an engineered Australian suspension and bigger brakes, you are probably safe doubling the payload if you pay attention to the wear items like pads and bushings.

That looks clean and compact--can't hardly tell how much work went into it! Keep us posted when you find out how it all works together...

Umm.... what exactly are you trying to say? It hasn't come through clearly, spell-checking might help-

Ah, thanks Verkstad, beat me to it being simple! Well here's a bunch more words... Connections are usually where electrical things go wrong. You may have stayed within the fuse rating but a poor connection inspired currents much hotter than the housing could handle. Resistance is electrical...

Have you checked the physical connections? The wiring bay on the Multiplus is very tight and a fight to get big cables landed. I would check the outlet/cord/screw-down connectors in the bay with a voltmeter to cross those possibilities off the list first--