The long slow FG build!

[BruceAndKrista]

Next it was Kristas turn to do some building! Which was good, because I had a lot of other things to catch up on!

She’s building it without me! | Fuso FG 4x4 Camper

 

[BruceAndKrista]

Not happy with the kitchen feet, I set out to come up with a better and more secure solution:


I made my own “MYKEA” parts | Fuso Overland Camper Build

 

[BruceAndKrista]

After 2 full years of building this truck, I’m still no where near done. I’ve got a lot done, and a lot left to do!! Here is a look back at the last two years!

Am I wasting my time? | Fuso FG Overland Build

 

[BruceAndKrista]

Building up the Kitchen feet!

The secret under our IKEA kitchen | FG 4x4 Camper build

 

[BruceAndKrista]

Adding some special parts to the roof, probably not what you might expect!

3D Printed parts on the roof? | Fuso 4x4 Camper build

 

[BruceAndKrista]

Starting the inside of the habitat box! Laying down the floor!

Does this thumbnail give too much away? | 4x4 Overland camper build

 

[BruceAndKrista]

An absolute waste of time, but fun to do and somewhat functional🤣

Custom fitting the CHEAPEST inclinometer on Amazon! | Fuso FG

 

[BruceAndKrista]

The hard part of the Kitchen install was underneath the kitchen...

The Struggle down under (the Kitchen) | Fuso FG habitat build

 

[BruceAndKrista]

More custom 3D printed parts to hold the kitchen together...

Slam latches, Sticky tape and 3D parts in the Kitchen? | Fuso FG

 

[BruceAndKrista]

It’s time for the countertop! This is heavy!!

Does this BUTCHER BLOCK make our Kitchen look big? | Fuso FG

 

[BruceAndKrista]

A little bit of custom work to get the overhead cabinets to fit properly... and a new “tool”

I used a new (old) tool! | Fuso FG Overand Kitchen build

 

[BruceAndKrista]

Wrapping up a couple small jobs to make more progress towards the finish line (it’s still pretty far away!)

✅ Checking off the build list! | Building an Overland Vehicle