I have a low rise Hi-lift mount made for the Wilco Offset Hitchage tire carrier. The original product is linked here on their site for specs and fit. I forgot I had this as I only used it on a few trips and I no longer have the hitchgate as it went with my 4 Runner. The powder coating is...
I absolutely love mine and have had it in use for the last 4 years with no issues other than losing a screw that holds on one of the feet. I just replaced it with another sheet metal screw of the same size from the hardware store and wahlah!
So when I had a slide out system in my 4runner I just took thin (1/4 - 3/8") strip of wood about 1" wide and glued that down around the perimeter of where the stove feet set so it would keep it from sliding at all. Underneath the stove I took some non-slip drawer matting like you would line...
I have a Front Runner Footwell water tank and the hose kit they sell that I am not really using. I have used it and its water tight. I did add a little sealer around the threads of the fittings to the tank just to ensure a good seal. These are pretty large and shipping quotes have proven cost...
I have one and have used it several times. It has held up well. I did find that with both poles in use and the other end attached to a vehicle there is the possibility for water to pool due to the lack of pitch on the top. the poles are heavy and burly and I didn't have any issues even in...
85” x 53” x 12” exterior
47.5" x 81" interior width and length
I also forgot to mention that the ladder included is telescoping style and has a matching canvas bag it zips into for storage in the tent it vehicle.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.