Dougnuts
Well-known member
Here’s a couple side shots. I see a lot more dirt from job sites than trails sadly but I’ve been getting out once a month.
😮. It's like the blue steel moment in Zoolander......It's beautiful!
Here’s a couple side shots. I see a lot more dirt from job sites than trails sadly but I’ve been getting out once a month.
@Bigc3031 did you ever do this? I need to find the 80mm ducting to redirect heat away from my Truma as it’s building up under bed platform and eventually giving me an overheat error. It seems damn near impossible to find any Truma parts in the US. Did you find any, and if so where?I’m looking forward to it. I was on the fence but they have a free Truma promo which is hard to beat!
I may add some ducting to get the supply away from the return as well as the thermostat.
I never got around to it mostly due to it being a pain to find CONUS. It’s on my list this spring, we’ll see. I was surprised there were no 3d print plans available either. I’ll post it up if I get around to it.@Bigc3031 did you ever do this? I need to find the 80mm ducting to redirect heat away from my Truma as it’s building up under bed platform and eventually giving me an overheat error. It seems damn near impossible to find any Truma parts in the US. Did you find any, and if so where?
Thanks for the feedback. My Truma was installed by AT Overland, so after I couldn’t find anything online or from the biggest Truma RV dealer in Phoenix (the parts guy said he wasn’t even able to order Truma parts, or at least the ducts), I contacted them online and a day layer Mario called me, said he had some, and sent me meter for cheaper than I could have ever gotten from the UK.I never got around to it mostly due to it being a pain to find CONUS. It’s on my list this spring, we’ll see. I was surprised there were no 3d print plans available either. I’ll post it up if I get around to it.