Search results

Look into the MWM 4.07 engine from south america if you want about the perfect power/weight/package. It will just make you angry that we don't get more diesel choices in the USA :) The 4bt is still a LARGE HEAVY engine. It may be two cylinders shorter from to back than the 6bt, but its still a...

This is the adapter once you get the t-case off. Its a bit of a pain to get the t-case off! There are some trapped blind bolts that are a little hard to get out. I'm pretty amazed it all fits! Its almost like its factory since its so dang short. That bearing is TOAST! You can also see some...

Well dang....two projects keeps me pretty busy.... I pulled the transmission out of the Willys today to swap in the replacement. The current transmission (sm420) was in the vehicle when I bought it. Its always had some issues, but it lasted the 8 years or so. This spring it finally gave up. I...

Yup, I was just going to make it.... I think I am going to use the Diamond Eye exhaust so I will have to cut off the factory 3" flange and weld on the new one anyways.... I thought I read that you can use the flange off the downpipe also, it is suppose to be the same size as the one at the...

I vote keep it and build it just like you want....its just money and time. If you have an attachment to it all the better, it will be worth more to you in the end. A project like this is huge though. You are either going to have to do a lot of the work yourself in a pretty large space with a...

3rd gen dodge wheels are 6.13" backspacing for the aluminum versions H2 wheel are 5.5" backspacing

Tele, You can borrow it any time. I would request that you order the Geno's banjo bolt though, that way I don't have to take mine off and install new gasket washer things with the bolt. The taped banjo bolt is only like $10. You can just install a pipe plug in it normally without the gauge...

I say build it as a pre-runner of sorts. You can keep it 2wd, maybe even add a way to get somewhat lower gears ( like low range without 4wd ). You can run larger tires for more clearance. Rear locker for traction. You can even install a winch in the rear for recovery. All this would still...

I'm guessing I have the 21cm. My truck was built in 4-92. The 14psi or so reading is at the intake manifold, so 1-3psi for the intercooler loss? I think I am at a normal level for a mostly stock truck at 7000-8000ft.... I might play with the pump more after I get some real gauges. I need to...

At least I am not that far off then. I need to order up a spring tomorrow! I'm gonna get a low pressure piston pump coming too.... I think with the newer turbo I will build boost MUCH lower, hopefully just off idle :)

The results of the fuel pressure test where interesting..... The truck idles with 4-5psi of fuel pressure. If I really romp on it the fuel pressure will drop to between 3.5-4psi. So, I just don't know. The pump isn't starving for fuel and going down to zero psi or anything. So, once I was...

I did a little work today.... I installed the Geno's banjo bolt. This was a nice piece, its has 4 large fuel ports..... Then I built a super high tech gauge mount. This is the little 0-15psi pressure gauge I am using to test the fuel pressure....and boost pressure later. The 4-5 psi...

Why a body lift?

You could also just mount a winch in the rear leaving out the multi-mount factor.... Most of the multi-mount systems I have used where pretty clunky. If you store the winch in the back of the vehicle and have to install it AFTER you get stuck its generally slippery and hitch is buried in the...

Tele, I picked it up for $309 off one of the diesel boards. I couldn't do an exhaust housing and compressor wheel upgrade for anything near that. Its also 15 year newer technology or so..... I don't know if I will bore the exhaust gate out yet. Most people that are running them on 1st gens...

Black rock wheels has some steel 17" wheels that are rated at 3650lbs. Pitbull tires has there Maddog radial tire in 38.5x13.5 that is rated for 4080lbs at 65psi. I have considered these as a replacement combo for my Michelin's since they are almost done. I got 2-3 years out of a used...

Maybe:sombrero: Yup, early 2007 vintage HE351CW with low miles. I had been looking for about a year for a decent deal on one. It should make a HUGE difference overall. Its basically 15year newer technology than my factory turbo. It supports a 325hp factory application and can support much more...

MMMMMMMmmmmmm..... This should be coming in the mail soon!

hahahaha, that sounds fun even if I fail.

So your saying for 35 beers........