Search results

Sometimes there were a load from the 12 volt fridge but it only pulls around 3 amps when running. I'd say measure the voltage before disconnect and as you disconnect it should drop. This is off course unless your fuse is popped. There is a fuse that carries the charging wire from the onefitty. I...

As my f150 shows "trailer connected" in the dash the voltage to the trailer rise to about 13.6. As the trailer disconnects it drops to battery voltage. There is not much amperage getting to the trailer as it is a thin wire. Perhaps 8 to 10 amps at the most I'm guessing so if your drawing heavy...

Yeah..... be interested to know. Good thing is that you are aware. That swing out will counter it quite a lot. I was just curious. Looks great.

What is your tongue weight with that water tank full?

Mine opened up not out.

Mine had plenty of lube in it.

Right. Ford donated the proceeds to the US FORREST service and outward bound. Serial number 1 with the sqatwizz.... Sawtooofffff..... Sachit...... Ehhhhh.... big furry mountain creature package.

First one sold for 1mill just a few hrs ago....

Thought I'd share. From Barret Jackson this afternoon.

Yeah..... For me I have really not needed one yet. Last year we took the 18 onefitty up yankee boy basin in CO, and the limiting factor for us was all the idiots that parked along the last few hundred yards. As we got to the top it became a mess to turn around without damaging anything parked...

Yeah.... It can get very dificult to find the right package. This is one of the onefittys I sat in yesterday..... Says nothing about a 12 inch display but yet there it was . I presume as part of the 302A...

You can get the 12 inch on an xlt. Not sure how but I Sat in one today.

Current trucks does have the option for a locking rear diferential..... I am considering the same as you but as there properly won't be many incentives on the Tremor I'm thinking just to build one myself on a 2021 for with the Ford factory racing suspension package..... tires. I will loose the...

I modded mine with extra 2 inch members. The build is embedded in here. If you search under my username it might pop up faster. I had a tepui kuggeneim xl ruggedized so it was heavy and in need of a more spread out foot print.

I went with the morimoto 2.0 led on both low and high beams on my 2018 onefitty. Amazing improvement and very cut off beam pattern they don't blind oncoming traffic. Very well recommended. I think they are on the 3.0 version now

That looks really great Wynn.

I will be happy to help, should you one day wanna give it a go. It is not as hard as it looks but does take a lot of time.

210 To be exact..... :)

I have had the yammy 2000i for 3 years now. Full tank is 1.1 gallon i think. It will run a very long time. @15% I ran it in eco mode and after 8 hrs it had still only used a bit over 1/4 tank. I was considering both the 2k honda and yammi. Yammi won due to the ability to switch off the gas thus...

I sanded the spot for the adhesion as the paint was very rough. I then cleaned with denatured alcohol, and used 3M pads with adhesive backing. Zip tied the wires to the pads.