Search results

I am not sure on timeline but let me know if you end up wanting them, it will be a month or so before I can get the LT parts. I am waiting to hear back from BTF Fab about what I can make work with the hubs/spindles I have now. Once I know that, I will know if I have to sell my setup or if I can...

It looks like I am going to have the opportunity to pickup a complete long travel front end, the kicker is that its 04-06 ball joint size not 00-03 like mine is now. As such, my full front end setup may be for sale. Its got probably 1000 miles on it since the manual hub swap. Comes with with new...

What gauge is the wiring? I tried a couple different cheaper led spot/rock lights and always ran into issue with the tiny wires. They weren't prewired though so splicing a reasonable gauge wire to angle hair gauge wire was a mess. I gave up and threw the KC Cyclones under my truck. Sean

I can't comment on the taco specs but I know on my Tundra, I had several shops align it within spec and it would still shred tires. Toyota's spec allows for way too much toe in from the factory and the alignment shops just rolled with it. After about 10k miles, the outer edges of the tires would...

My jack mount/skid plate is from tt motorsports but I am not sure its made anymore. I like it for what it is. Its does rattle but thats more to do with the jack than the mount. The mount and plate itself fit really well and has a provision for a lock. I made the jack handle mount myself, its...

05-07 WRX/STI seats fit really well from what I have seen. I have thought about seeing how my 19 WRX Recaro seats fit but I am pretty sure my wife would kill me if I tried. Sean

Thats the big choice for me as well, I don't want to lose the option to recline but I also don't use it so its probably a non issue. Sean

Prp makes awesome gear, their seats are on my list but not currently in budget. Let me see if I can find the link to abother tundra with them in it. Prp comp elites, a member on dezert rangers has them. https://www.dezertrangers.com/index.php?posts/3986326 Sean

You could go old school mini truck and do a spring loaded flip up/down plate. Sean

Why not make something hitch mounted or use the recovery clevis mounts That is the biggest issue I have with my truck. When the hitch was in the stock position under the factory bumper, the departure angle was TERRIBLE and it hung on everything. When I moved the hitch up to inside the frame...

No major updates, I have been driving the truck for about 2 weeks since swapping the intake/injectors and I can safely say I have not noticed any difference in the way the truck drives. Since I did the swap without any real data from before/after with the current setup (winch +295s+ loads of...

Shifter Mount Base Fab (nothing is more permanent than a temporary item) I got started fabricating my replacement console yesterday, it mounts to the floor of the truck by the inserts used to hold the trans shifter boot in place. I still have some work to do to figure out what the rest will...

After the failure of the first transfer case, I decided to swap my transfer case back for a replacement J shift. I installed a set of double detent springs and upgraded shifter seat from marlin crawler and modified the shift lever to be (approximately) straight up and down. The stock parts were...

Sounds like you want a sequoia or one of the 4runner cases then. I don't know specifics but those are the awd cases. Sean

As far as I know, all first gen tacoma, 00-04 tundra, 01-04 sequoia, and 95-04 4runner cases will suit your needs. You need to identify what version of case you want though. Sean

For your application, do you need a left hand (us drivers side) or right hand (us passengers side) drop? Sean

Lexus GS400 1uz Water Log Vs Tundra 2uz Water Log It looks like everything will clear with the exception of the water bypass fitting on the manifold. The lexus one is lower down and tilted more horizontally which means the hose hits. The back side of the manifold where the fitting is pressed in...

2001 to 2005/6 throttle body adapter design and test fit. After hearing a couple people speak highly of swapping to the 05/06 plastic manifold, I figured I would give it a shot. The 05/06 manifold has a different bolt pattern than the 00-02 so I took some measurements, made a cad template...

100% recommend getting a diy alignment setup. I used to chew up front tires like crazy even after getting it "professionally" done. Its night and day better after I started doing it. Sean

I had not noticed the lack of a "rim protector" until you pointed that out. I really liked my duratracs but I majorly chewed them up with a bad alignment and they were due for replacement. Goodyear didn't offer the 295 size I went with this time so I went BFG. Sean