Search results

  1. joeblack5

    Unimog 404 camper bus tdi diesel conversion

    Good eye, 5 kw , mep802. Still needs some work, but not used in this build. Johan
  2. joeblack5

    Unimog 404 camper bus tdi diesel conversion

    Hi Charlie, it is the first vw 1.9 tdi ahu motor. This engine has a steel oil pan and oil pump in the back. Also the computer does not need an immobilizer.. it is mated to the original 6 SPD transmission to the unimog 404. Original portal ratio, not sure what that is. Tire size is one size up to...
  3. joeblack5

    Unimog 404 camper bus tdi diesel conversion

    Hi folks, The start of this thread is at the unimog Mercedes forum. Looking at others people builds there it seems that I do not fit in there very well so going to give it a shot here after seeing some other unconventional builds. In short sofar. The chassis is an unimog 404 without motor...
  4. joeblack5

    1958 Unimog 404 with cabover flex

    Spring has started so we got out and tried to remember what was on the agenda. Decided to tackle some insulation, more as an experiment and to get back in the groove. Then we drilled holes and screwed the skin with ss screws and 1/8" thick nylon washer of the bus framing to reduce with thermal...
  5. joeblack5

    OM 366LA Starting current peak/sustained

    We have lithium starter in our bus Dory. Mercedes om906la ,24 volt system. Diy battery bank made of lishen 272ah batteries. Two 24 volt systems in parallel. So 540ah. This is also our house bank. Not sure how to read the spec on the foreign cells. 10c impulse current, to me that would mean...
  6. joeblack5

    Design/Layout Feedback for a First-time Camper build

    We used two econolines for camping and slept north south but it does not use space in an efficient way. We now have a econoline srw with bus body and sleep east west.. big difference in usable space. Absolutely use swivel chairs, biggest difference in space. Have fun designing and building. Johan
  7. joeblack5

    where_the_heffalump_roams 917 AF

    You hooked it up ok but you have to realize that current can flow on two directions, Into the battery, ( charging) and out of the battery( discharging). The mines sign in front of your display tells that. But if you hook up the meter backwards then the sign reverses. You are doing ok with...
  8. joeblack5

    where_the_heffalump_roams 917 AF

    It looks like that amp meter is hooked up backwards and the reading is negative, so actually that current is going into the battery, I assume you see your solar current charging your battery. If you left your fan on and did not have a lot of solar charging your batteries would be dead in a...
  9. joeblack5

    MB 1120 Coming to America! Purchase, Build and Now Travel!

    Great that the independent mechanic was able to fix the problem what a Mercedes dealership did not want to touch. Shame on them. Now what was the cause? These bearing shims should be stationary. Not rotating. The only way that this could happen if a bearing half shell started rotating on the...
  10. joeblack5

    Proper Pitman Arm for 2000 Ford E350 Quigley

    Can you convert the 2002 steering box. Id it was a Quigley then they are very helpful when you give them the vin number of their conversion. They have a parts list for that.. for future repairs / owners it is easiest if all stays the same. So don't forget to get their door sticker and or vin...
  11. joeblack5

    where_the_heffalump_roams 917 AF

    Best addition for sure. Looks like he is still a happy pup. Hope he likes traveling, we love having our dogs with us on the road, would not travel without them. Johan
  12. joeblack5

    Cummins Canoe (A Stepvan Story)

    On our last winter trip out west we took out chickens along. 3 months.. even laid eggs.
  13. joeblack5

    Rear Diff Lock stuck

    If it is softline to the actuator maybe remove and bypass directly from the tank together with an air switch.. so you can actuate quickly and repeat often without the engine running and listen to the action inside the axle. You might be able to discern leaks of the seal, versus piston stuck or...
  14. joeblack5

    where_the_heffalump_roams 917 AF

    Neil, I can see that. The overlander industry plays with big money.. of course you expect something to go wrong with your domestic and you have to open it up then it is convenient that there is a heat exchanger in between. Every school bus in the USA is without heat exchanger and there are...
  15. joeblack5

    MB 1120 Coming to America! Purchase, Build and Now Travel!

    Wow, vermonster, you are having a lot of bad luck . Impressive that you share also all the problems and downfalls. Disappointing that Mercedes asks that kind of pricing for straightforward parts. Best, Johan
  16. joeblack5

    where_the_heffalump_roams 917 AF

    I do not agree with the above, sofar in commercial buses, tractor trailers and just as in the webasto / eberspaecher manuals there is no use of a heat exchanger. The engine coolant, crud and all goes happily thru the interior heat exchangers in every car and truck ,sometimes with assistance of...
  17. joeblack5

    where_the_heffalump_roams 917 AF

    The pump has build in check valves.. my pumps are mounted real close to the file tank and as low as possible. So the pump pushes fuel thru the line. I would take smaller fuel line, 4 mm is a lot of volume , also rubber line absorb fuel pulses , might be less noisy but maybe unintended...
  18. joeblack5

    where_the_heffalump_roams 917 AF

    I did not read back what heater you have, but if it is webasto tsl17 then it has two settings, high and low. The file line should be very small, like 2mm id so that bubbles cannot stay behind and accumulate. It also would be good if you get some more numbers, like what is the actual coolant...
  19. joeblack5

    Anyone know how many Unimog 404 vans where produced?

    You might want to ask at the unimog forum over at benzworld. There are some experts over there. Look for truktor, height have info, Johan
  20. joeblack5

    E-350 Cutaway with Total Composites Box

    Very nice build, great idea and use of space for the dogs, ours insist on being in front but your design is definitely safer. Like your jack stands. Maybe missed it in the thread but how much space with the bed stored up below the bed to the floor and how much when lowered from the bottom of...
Top