Search results

Getting ready to install my dual battery setup, got the national luna kit, going with the diahard platinum battery, pretty much decided I want to mount the battery in the extra cab of my tacoma, kinda where the stock jack is held, cut the sheet metal and have it drop in that space. Looking for...

All his pricing is on his website

This weekend i used the setup for the first time camping, and was very pleased with the improvement over my old style. Before i had all my stuff in about 4 bins, one of which was a 70lb bin full of spare parts, fuilds, etc that i had to get out of the bed to clear thr room for sleeping...

Not as much as youd think, i would estimate in the range of 100lbs, most of the wood used was 1/2" and 3/4" only structural areas. There is not a huge amount of bracing on the inside either, but it is plenty strong to support two people sleeping on top, no give or flex whatsoever. My taco is...

His shop is in Perris

The platform is removable very easily believe it or not. The front drawer is a seperate piece, the side wings are seperate, and the center section with the 3 compartments is a seperate piece. The bottom plywood is secured to the bed with a couple botls and everything is secured to it, Charles...

http://www.expeditionportal.com/forum/showthread.php?t=50723

some more pictures

This is my storage and sleeping platform built by charles warfield of warfield offroad. Prior to commiting to this i looked through countless of builds on this site, borrowing the good ideas and learning from the downfalls. The biggest downside that i saw was the "home made" quality of most...

San diego

Here is a thread of his platform http://www.expeditionportal.com/forum/showthread.php?t=39882

Looking for a recommended cabinet shop close to SD that can build my sleeping platform for my tacoma. I have a drawing and can buy the hardware i want myself. Just looking for a shop who is not foreign to a job like this and will work with me to get it done how i want it. My design is inspired...

Do they make them for the 01-04 tacomas?

Common someone has had to run acroos this in the past...

Been searching around to find a self stopping tire inflator, kinda like the stunts for deflation that stop by themselves at a certain psi. Something that i can hook up to my quick disconnect turn on my OBA and not have to hold the lever down to inflate like on the conventional inflators. Thanks

Yes, the weld on the frame did break, and I am amazed it held this long, even when putting this on 2 years ago that piece of sheet metal on the butt end of the frame with the welded nut looked very flimsy. I know of others to whom this has happened not as severe as mine, but the welds broke and...

Not much more to it, i was hauling down a trail 40-50mph in borrego springs, it was fairly smooth with mild rollers that the suspension was soacking up fine, then a large dip came up, it was too late for breaks so i tried to power thru it, but it was too big it ended up launching me, the landing...

Think twice about putting really heavy setups on the front of a vehicle, this is what happened to me couple weeks ago, the arb bumper sheared off its mounts completely and swung underneath my truck and i dont even have a winch. Granted I hit a pretty big dip and actually caught air and upon...

Yea, steve at sonoran steel has a "best stock suspension kit" its only 600 for everything

Yea I bought my 2001 4wd with 160k on it, put about 5k on it since and aside for regualr maintanance has been running like a champ, know on wood. Also just put a SS 1.2 lift on it, highly recommend it. I have always owned toyotas and am still amazed with how a 10 year old vehicle with 160k...