Search results

Two separate places on the led circuit board and then once on the plug side. The soldier didn't have good adhesion to the contacts and would just peel off. To fix the circuit board side, I cut/broke the lens from the housing, repaired it, and then glued the lens back on.

Don't be afraid to open them up, the connector attaches like a factory bulb. I ended up getting a refund on the same lights last year after the solder kept breaking off. I fixed one side, only to have the other side break 2 days later.

@jscherb that's great news! Thank you. I've got a heat gun and I'll put that to it tonight.

Well, I had hoped to use this past long weekend to wrap up my top but I messed up and could definitely use some direction. Friday morning I started out reinforcing the last 3 flanges. I mixed up the SMC compatible resin with about half the recommended hardener as the temps were already in the...

I'm finally making some progress on my conversion after many months. Getting the flanges ready. Bonding the first flanges on. I added an additional stabilizer at the bottom front using the measurements from the tube of the jeep. Bonding the rest of the flanges. When I reinforce the flanges to...

No problem. With the CVT tent on the Smittybilt it would take me around an hour to get camp all set up and about an hour and a half to tear it all down. We would leave the annex attached to the tent and had quite a bit of stuff that we would fill the annex with once it was set up. If we were...

It depends on what your needs/wants are. We had ours a little over 2 years and enjoyed it. It's pretty much bare bones so its an open canvas for sleeping arrangements, electrical, water, and what ever else you might want to add. I have a 2012 JKUR on 35's and it handled it ok with the stock...

Well i got the first flanges done. I think i should have watched a couple of videos on how to do it first because it was definitely a learning experience, still not sure if i did everything right, hopefully it'll hold. JSCHERB have you done a how to video on fiberglass? I saturated it, but i...

When creating the first set of flanges how many layers of fiberglass tape did you use? You said multiple and in another spot you said layers 2-4 after the mat, so I'm guessing 3 layers of fiberglass tape? I'm finally moving forward, I've got the forms on and im cutting the mat! Thanks for...

Here is what I went with, https://www.amazon.com/gp/product/B07JN7BRJ4/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 . I've taken the hose off and put a spigot on it.

Getting ready No turning back now All chopped up

Hey Jeff, how would you go about the cut at the front edge of the 4dr roof? I skimmed back thru and searched, but didn't see anything. Thanks.

Well, I just placed an order at US Composites! I hope to tackle this project in the next couple of weeks!

Looking good. I placed channels in several places around the bottom of my tent and awning. 5 gallon bucket organizers cut in two work well for putting random things in, here I have one for kitchen supplies hanging from my awning. We used a larger closet organizer inside for clothes and other...

Here's one of the threads https://www.expeditionportal.com/forum/threads/intech-rv.164573/ , there is also a lot of info in dreadlock's thread here https://www.expeditionportal.com/forum/threads/dreadlocks-outfitting-of-intech-discover.197207/ . Hopefully this weekend I'll get to pick up my new...

The pump does have a pressure switch, this switch is here to cut power to the pump for travel or over night when there is no need to power the pump.

Well I added a faucet for the sink weekend before last and then said goodbye to it yesterday morning. :cry: We were all sad to see it go, but we are excited to see where we go next. I might be spending more time over in the Intech thread? but will still follow this one to see the awesome...

The only issue was we had to extend the output with a piece of ducting otherwise the a/c would short cycle due to sucking the cool air back in.

Sold this morning.

Great job, looks awesome!