Search results

I fabbed a wheel chock for my motorbike I'm planning a trip to New Hampshire with my nephew

I got the fenders and fender boxes finished up and the propane plumbed for the stove and ref. I fabbed up two interchangeable couplers, one for the Lock N' Roll on our tacoma and the other for the ball on my nephews tundra

I also got another window put in the front door, I like to see who's knockin' Also, you can see in the above pix, I fabbed a spring stop for each spring near the equalizers. One of the issues with tandem axles is when one spring is fully loaded and the tandem is unloaded. It sometimes lets the...

Thanks for the comments, they make this seem less like broadcasting radio waves into space :alien: We got axles. I wanted to use wheels that matched the truck and found a couple of good deals on cr. One full set with the proprietary lug nuts and usable tires for $200 and another full set but...

I just use a hydraulic jack and some wood blocks, things I carry anyway

We got progress. We raised the bed by a 2x10 so it just clears the ceiling when it's folded up and there is adequate room underneath for storage bins and coolers and water containers. We insulated the roof with bubble wrap and "reflectix" with plumber's tape for support and foil tape to seal...

While waiting for the new axles to arrive I found some stock wheels/tires that match the ones we have on the tacoma on cr for $200 including the proprietary toyota lugs and did some work on the plumbing. I built a shelf with a drawer under it for plates and utensils. With an aquatainer on...

Hi everyone and thanks for inspiration over the past few months. I've always been a pretty minimalist traveler, from a bike and a bivy sack. But as time goes by I've realized that I don't like sleeping on the ground much. I grew into truck camping, I don't own a car, I could just sleep in the...

Thanks for the explanation. I just ordered a pair of axles to go under a little cargo trailer and I have tacoma wheels to go on them and wondered if I had overlooked something

I like anything that someone builds, yours looks good. Why did you use 2" wheel spacers if you had 6 x 5.5 hubs and toyota rims? thx

Shouldn't be too hard to figure out. Measure what you have and add the extra width of whatever tires you want to use. The wheel backspace should be the same or it won't work. At least the backspacing on the goannatracks singles is so all the extra width is on the outside