Search results

https://blitzkriegoffroad.com/products/steering-clevises-rack-adapters-pairs?variant=45921138182 Make sure you get the correct thread for the rack, I am not sure which size it is anymore. Sean

I would love to take a look at your console even if its still in progress. I am working through that now as well. Sean

Loooots of bump steer but that could have been an issue with the setup at the ball joints. If I get some free time in the next year I will end up taking another crack at it. Sean Sent from my LM-G710 using Tapatalk

Bump Sean Sent from my LM-G710 using Tapatalk

They are currently installed on the truck. I am only planning to remove them if someone buys them. Sean

No clue on total miles, I got them used a few years ago. My truck is an occasional weekend driver so I haven't put all that many miles on them. I loved these springs but I am preparing to do a link setup at some point. Something to keep in mind is that they ride great but you need a good...

They are standard g57s, I think 11 leaf pack. Sean Sent from my LM-G710 using Tapatalk

Switch components and panel. Switches are red illumnated, the panel is laid out for a circuit breaker on each switch. Each of the larger holes are are sized for blue seas systems usb, cigarette lighters, and volt meters with a breaker spot for each pair and one for the whole panel. Make an...

Got it, I assumed you had the same dominator style airlift bags I do. Sean Sent from my LM-G710 using Tapatalk

That is incorrect. I am using airlift dominator 2600s on my truck with the daystar cradles. I have mine mounted inboard of the leaf springs. Granted, my setup is different since I am not using the shocks in the stock location but the daystar cradles work fine with the airlift bags. Sean...

How do you have your bags setup? Sean

$550 plus shipping Sean

Considering Selling my Deaver G57 Springs if the price is right, I recently rebuilt them with new pads, lube, and bushings from deaver. They have less than 3k miles on them since the refresh. Sean

I also waited like two and a half months for the rad to come in FYI. The people at champion were upfront with me about the delay but they also couldn't tell me when the part would be done. From memory, they only make them as needed which is fairly infrequently. To be clear, the only thing I am...

As a heads up, I just installed a champion all aluminum radiator 2 weeks ago. The hang tabs are in the wrong spot by about an inch and the mounts are on the cheaper side. The core and welded end tanks seem to be good quality but time will tell. I am really not thrilled about how it mounts so I...

It could potentially bend the overload leaf but its pretty damn thick. I would be more worried about it slipping off since its just a flat smooth plate. Sean Sent from my LM-G710 using Tapatalk

King also has a specific set of lowers for yotas that pushes the spring up relative to the lower shock eye. Sean Sent from my LM-G710 using Tapatalk

Can you post a picture of the cams and what position they are? One thing I don't like is that the camber is positive on one side and negative on the other. Realistically you probably wouldnt notice but it should be the same side to side. You could probably fix the steering angle offset and pull...

I want to start by saying I am by no means an alignment expert, I just got tired of setting money on fire any time I tried to get the truck aligned. Take this with a grain of salt, a slice of lime, and a healthy shot of tequila. Caster is upwards of 5 degrees but I can't remember off hand. Most...

I have been running for the last few months on a diy alignment with that kit and its held well. I am on 285/75/16s and it worked no problem. The duratracs have a little bit bigger side wall lugs and it cleared no problem. I set caster to max, then camber to as close to neutral but within spec...