Search results

I'm curious to know if these will fit our LHD vehicles.

I've been eyeing one of these: https://www.amazon.com/YUEWO-Repair-Machine-Mending-Cobbler/dp/B07S3S51TP

I believe Toasty did a complete head swap. I'm sure he will chime in at some point.

2.5L Hyundai parts? I do not think the D4BF 2.5L parts will swap to a 4D55 2.3L, or are you thinking about a total engine swap? And I seriously doubt there would be any Hyundai diesels in a salvage yard in the USA or Canada being they were not in any production vehicle here. There are more...

no thread, no link

Agree, Complete from Mobis is the only way to go, it will be about $3700 delivered +/-

Welcome!, I also have an '83 pickup MM badges thou and 4x4 / gas.

drill the center out and use an EZ out. Probably not going to be fun. Also potential to use a small cut-off wheel and slice a straight screwdriver slot in it, or cut the head off completely.

currently 15K past due...

This is from the FSM. If you don't have it, it can be downloaded from mitsubishilinks.com Looks like you are "almost" in for caster Only issue is the 0.05 out difference side to side from this spec.

another thing that comes to mind might be lower control arm bushings. Your best bet is to find another shop.

Previous accident? or current tech doesn't know what he is doing.

Get to a real alignment shop. These guys are probably complaining that they need to set toe. Find a frame shop. I use these guys, every metro area has one or several. http://www.frameandaxle.com/

Wish I could find a few yards of that FWC upholstery, I really like that grey bone look.

I'm building a pop top for my truck. For under mattress ventilation, are people using Hypervent? or something else? Any better deals out there than these guys? https://www.mattressinsider.com/mattress-condensation-prevention.html

Buy a new one from Mobis (Hyundai).

Unicorn for sure. I've been looking for an 80 series and good ones locked are $10K plus with a lot of miles. These days I'm not interested in anything with more than 150K miles and would prefer another Gen 3 sub 100K (looking). There is a local 2001 Tacoma for sale here with 225K miles for...

3/4" ? no other support across the open span?

what are the panels made from under the mattress that span the support structure?

Closer to Land Cruiser, but any vehicle 25+ years old is going to need to be freshened. I'd hold out for an SR as well. 3.0l is gutless in this years series (I've owned 2). Kinda expensive for an LS unless you can get it under $2K. I know a lot of people here say that KBB is crap for an old /...