Search results

Nice axle. Are you planning 4 linking it or welding perches back on it?

Lol! Hahahahaha!!!! I thought the post was about the cj or YJ model not the car..

I have extended bump stops if that's what you mean. But they're probably 4" taller than oem tires

I just installed 31" bfg k02 on my xj. I can't say much for longevity at this point. Traction is great. They balanced really well, I was surprised, I didn't use more then 1.5oz on each side of the wheel. Some road noise, nothing like mud tires, and they roll smooth. Did I mention they look bad ***?

It's great to see the xjs staying alive on the jeep forum here, let's keep it going! I'll add another photo

Damn, good job. Just like jeep shoulda done!

Also, is the compressor wired through a relay? If you're pulling power from a existing circuit running through a switch then power to the compressor you are over loading that circuit. It will blow fuses or melt wires could cause fire. I'd pull power from a source like dome or radio, run that to...

Well, I have some down time so thought I'd think up a list of little things I've done through the years of loving the old girl. (Not in actual order) - water pump, coolant bottle, all heater hoses, radiator and rad hoses, double clamped on the rad hoses. - power steering pump, return lines...

Where are you pulling power from for the control switch?

Again, very cool scrambler

Yes! Heated for those cold nights and mornings

You might add a extra outlet in the bumper for the hitch mounted pooper.. Haha I had too...

Full lock to the right a little. I might need to fine tune my trac bar. In theory I shouldn't rub fenders cause I already installed longer bumpstops. I'll find out tho!

**** yea!! Baby got new shoes today!! I mounted 31" k02. I gained about 1.25" of clearance at the diffs. I can't wait to hit the dirt!

Pulled the half shafts out of the zj. I probably won't have time to put new u joints and install them on my xj for a couple weeks tho. The holiday will take up some time.

So today I scored a 97 ZJ for free!! I really didn't want it but it has the front axle shafts I've been looking for. I can get rid of the front disco on mine plus I'll have the bigger u joints. Also the ZJs front drive shaft will work either front or rear on my xj (so now I'll have 2 spares) I...

If you go back to the JY get the crossmember it will have the nutserts. ace hardware has nutserts you can use for the frame side. Leafs will sag more then coils. but its up to you. I would get the v8 steering from that zj. The tie rods are much stronger than the xjs. Great upgrade. the drag...

No need to cut a hole for the pump. It's right there in front of the tank. Take a look behind your differential. 97+ you have to drop the tank

yes. v8 Zj coils will give you about 1.5". Also I don't know about the newer xjs but mine didn't have any threaded holes to mount the t case skid. I had to add Nutserts.

You might look into v8 ZJ progressive coils. Moog makes them. I think I paid 65 for the set new. Or PAC springs are less than 100 from jegs