Search results

The first part of the build, apart from who to source the box from, was what vehicle to build it off of. Originally, I had a deposit on a 2019 Dodge 3500 Cummins with their G56 manual. After four months, I got tired of waiting for a $55k+ truck and cancelled my order. Eventually, I found the...

Sorry, on the sidewall of your OE tires.

It seems like this is getting to be a little played out, but hey, maybe we're all onto something... I've been planning on doing this for a while now and finally got the blessing from the Minister of Recreation (aka - the Wife). Initially I was going to just post a summary build thread once the...

The load index is technically the weight rating. What is the load index on your original tires? Use that as the minimum when you're comparing to other tires. As Ranger Bob mentioned, finding appropriately rated tires can be tough.

If you look at Toyo's specs, they'll let you know what the weight rating is for a given size tires. In conjunction with the GVWR on the VIN tag of your truck, you should be able to figure out what size would be appropriate. The tire pressures on the door tag are only for the stock tires. The...

That should fit. I had 285/75-16s Toyo MTs on with a leveling kit (slightly smaller OD, same width) that fit fine. No rubbing on or offroad. Leveling kit is stock rear and 2" front lift. There is plenty of vertical space in the wheel wells. Most people rub on the springs/suspension depending on...

What did you cut this angle with? I appreciate all the photos and info as I'm waiting for my TC kit as we speak. Your project is looking good! a

That is a nice looking truck. As others have said, there are practical limitations to older trucks and their oldness. As long as you’re willing to deal with that, I think these old Super Duties are great. I have a 2000 7.3 with 220k miles that is perfect (for me, anyway). The issue of old parts...

I assume you mean my F350. The box is actually an Autohome Airtop, size small.

This shouldn't be underestimated. Mine, when loaded to capacity, weighs about 1000lbs (when you take into account the weight of the slide itself). At the campsite, I try to burn extra calories to make sure that the truck itself is level due to the RTT, so it isn't a problem. The issue arises at...

I got a slide from Slide Masterin WI. For an 8' bed with 100% extension, the cost was about the same with the benefit of being able to get at everything.

I've always wondered - are the acrylic panes replaceable in the Tern windows?

What are the approximate exterior dimensions of the bathroom? You're using a composting toilet, correct? Do you anticipate any issues with the wetbath aspect? I heard that they don't like that kind of environment and need to be in some sort of enclosure or something? One last question - do...

I'm really enjoying watching this come together. Could you go into more detail regarding the wet-bath build? Dimensions, what you're using for the shower pan, etc? Thanks!

Any chance you're planning on changing the profiles of the extrusions for your regular campers to this one? I realize that these are slightly smaller in dimension when compared to the floor and roofs of your other truck campers.

Agreed. Much of these small wood-fired stoves come from the sailboat world which is also a space-constrained, fiberglass and composite constructed environment. I don't see the problem. http://www.marinestove.com/

So, it is ok to turn over the cooler to get measurements even though the manual says maximum angle is 30*? Thanks!

Could I get the hole spacing for the mounting holes on the bottom of the CFX 75? I imagine the fridge is designed to be turned upsidedown for me to measure it myself...

Honestly, I'm not sure that any one type of construction would benefit more or less from an spring mount than another, if we're assuming that allowing the house to move separate from the chassis reduces strain on the house itself. I would think that would prolong the life of any setup. I'm just...

The bolded is a good question - I'm not totally convinced it is necessary. It seems like it would make sense in theory. The camper itself will most likely be a Bundutec or Total Composites build. The plan is for it to be as light as possible (certainly within the weight rating of the chassis).