Search results

Does your truck have a DPF? I did not think that the 2008 FG140 did.

Well, that depends... do you want your fillings to stay in your head when you hit a pothole? :) The standard bump stops have little to no softness; if you bottom out you will definitely know it. Something like a Timbren progressive bump stop is a very worthwhile upgrade, in my opinion.

In Australia there are now many people that have the skills to do a remap on the 4M50 engine's ECU, which is one thing that has definitely changed since I posted last about blocking off the EGR. Something to bear in mind if thinking about doing an ECU remap is that once this has been done...

As Howard has already pointed out, it is the output volume of a compressor that is more important than the maximum pressure it can attain. Another important specification is the duty cycle (how long it can run at full load). If you are using an undersized compressor to pump up large tyres you...

As much as that truck has air bags, I would not really call it air bag suspension; it's more like air bag assist.

I have seen some trucks being setup this way (normally at the rear), but there are potential issues when it comes to greater articulation, so if you are planning on going down this route you really need to do your research.

Buy a bigger air compressor. ;) Alternatively, use the extra space for a decent sized receiver.

An engine driven compressor will likely have a better duty cycle than most of the electric alternatives and possibly a higher output too. Modifying an AC compressor for this purpose is not overly complicated and there are lots of videos out there that show how it can be done. The biggest...

Difficult and involved... maybe. Impossible... unlikely. You just need someone with good design and manufacturing skills. :)

There are numerous online truck parts stores in Australia, but I have no idea of what's available in the US. I have also seen quite a few parts being sold on eBay. You should also know that many of the NPS parts will be the same as the NPR parts. Normally it's only the 4x4 specific parts that...

Unless you also include a shock absorber of some type it will be like riding on a pogo stick. Springs alone... very bad idea.

Just for comparison... my kinematic subframe is not hard mounted at any point, but in order for that to work safely the spring mounts have to provide fore, aft and lateral support. I have seen lots of subframe designs over the years and there have been many differences between them. Ten years...

Shouldn't the company that is building your camper setup have the answers to all of these questions you are asking?

The truck's electrical system can suffer a serious voltage spike if the battery earth is disconnected while the truck is running, because the alternator will still be generating power. This could destroy your ECU. If you wanted a "kill switch" for the engine, it would also need to include a...

A big dog on a long leash... ;)

Exactly.

There are a lot of variables when it comes to dynamic loads, so I totally agree about a trial and error approach when dealing with kinematic subframe mounts. It's what I did. Just a word of advice... if you can, choose a spring size that comes in a variety of spring rates. That will allow you to...

How are you mounting that tank? I ask because that area of the chassis is likely to experience a reasonable amount of flex, which is not ideal for a metal tank.

Is it... or is it just a whole lot of AI generated camper concept vehicles?

If you were in Australia I recon that you would have sold these very shortly after you listed them. Obviously the US market is a different animal. :(